Forward Lift B60-9 Snap Ring 9mm (M9) for CR14 and Mid-Rise 6K Lifts

Description

Forward Lift B60-9 Snap Ring 9mm (M9) for CR14 and Mid-Rise 6K Lifts

Replace missing, worn, or damaged lift hardware with the B60-9 Snap Ring 9mm (M9), listed for use on CR14 and Mid-Rise 6K Lifts. This hardware is used when servicing the specified Forward Lift assembly. Match the part number, size or description, and listed application before ordering.

Product Information

• Brand / Equipment: Forward Lift
• Manufacturer / Reference Part Number: B60-9
• Store SKU: FODB609
• Component: Snap Ring 9mm (M9)
• Listed Application: CR14 and Mid-Rise 6K Lifts

Fitment & Ordering Notes

Automotive lift manufacturers may use different parts across model years, production runs, or equipment revisions. Before ordering, compare the reference part number and the model/application information in this listing with the identification tag, parts manual, or original component on your lift. If your equipment uses a different part number, verify interchange before installation.

Additional Existing Product / Fitment Information

In the drawing images above this is part number 14 in the CRA14_PARTS-BREAKDOWN drawing and part number 57 in the PARTS BREAKDOWN MID-RISE 6K 2005 drawing and part number 14 in the newer cr14 parts breakdown drawing.

Item #B60-9: M9 Snap Ring (Ø9) for Direct Lift automotive lifts. This small retaining ring secures 9mm pins in the yoke end assembly, keeping cylinder and linkage pins captive.

Fits the following lift models — part number B60-9 appears in the parts breakdown of each of these lifts: Forward Lift CRA14, CR14 (newer); Direct Lift Mid-Rise 6K (2005).

Direct OEM-style replacement. These small rings are easily lost or sprung during service, so keep spares on hand when working on yoke and pin hardware.

Cross-check part number: Forward Lift B60-9. This is a Forward Lift replacement part.