Need Help? 
Description
Coats 8113277C 40mm Truck Centering Cone Kit for Wheel Balancers
Standard balancer cones are designed for passenger car wheels and are often too small to center light and medium-duty truck wheels. This dual-sided cone kit provides proper centering for truck wheels with large center bore diameters. The aluminum backing spacer is required because most balancers cannot accommodate a large center cone without it. Always measure the center bore of the wheel before ordering to confirm it falls within the cone’s range. This kit fits balancers with a 40mm shaft only.
Product Information
- Manufacturer / Reference Part Number: 8113277C (Coats Model: 113277C)
- Store SKU: TM0040
- Component: Truck Centering Cone Kit – 2 pieces
- Kit Contents: (1) dual-sided centering cone and (1) aluminum backing spacer/plate
- Shaft Size: 40mm (1.57 in)
- Hub Range: 4.72″ – 6.85″ center bore
- Application: Light duty and medium duty truck wheels (3/4 and 1-ton trucks); Ford F250/F350, Chevy 2500/3500, Ram 2500/3500, some F450/4500 models
- Listed Application: Wheel balancers with 40mm shaft (see compatible list)
Compatible Makes / Verified Fitment Models
- Accuturn: 5500, 5600, 5800, 6000; 5100 (S/N 51-0623 through 51-1457); 1200, 1220, 1250, 1400, 1420, 1450, 1500, 1520, 1550, 1650, 1820
- Atlas: most models with 40mm shaft
- Hunter: 700; DSP9500 (produced 1990-1992)
- Triumph: most models with 40mm shaft
- Rhino: most models with 40mm shaft
- Sicam: most models with 40mm shaft
- Coats: 775, 875, 1175, 1000D, 1250, 6275HS; Baseline 200, Baseline 225; XR1800, XR1850; and more with 40mm shaft
- Snapon: EEWB334A, EEWB331B, EEWB332B (with 40mm shaft)
- John Bean: VPI System 3, System III, B800P, B600P, B400L, B340P, B200S, B1200P, B2000P and others with 40mm shaft
Replacement / Cross-Reference Numbers
- Coats OEM Part Numbers: 8113277C (Model 113277C), 90040BK, 811330
- Hunter Alternate: 20-1207-1
- Snapon / John Bean Alternates: EAM0003J08A, EAA0346J76A
- Store SKU: TM0040
Fitment & Ordering Notes
This kit fits 40mm shaft balancers only. Separate kits are available for 36mm and 28mm shafts. Measure the center bore of the wheel you intend to balance and confirm it is within the 4.72″ – 6.85″ range before ordering. The dual-sided design allows both front-cone and back-cone mounting, making it ideal for dually wheels.
