Product Description

This is 1 seal kit for the hydraulic cylinders found in Many Ben Pearson 2 post lifts. It meets or exceeds factory specs. It fits lifts with capacity between 9000-12000 pounds. This kit rebuilds PACOMA cylinders that BEN PEARSON used through many years of production.

This Kit Will Rebuild 1 Cylinder 

Ben Pearson cylinder seal kit for car hoist

-HOW TO IDENTIFY YOUR CYLINDER IS A PACOMA cylinder
If your lift has a PACOMA cylinder in it, it will be approximately 72″ tall with a small bleeder screw at the top. This cylinder has a HEX STYLE BLEEDER SCREW in the top of it. Typically stamped on the cylinder there will be the word “PACOMA and either the numbers “91586” or “95128”. If you have your cylinder apart already, compare your piston seal with the one pictured to the left. Pacoma cylinders have distinctive blue ribbed 2 piece seal on the piston with a black inner seal that goes inside the blue seal (note if seals have been in Hydraulic fluid for a long time they may be a different color). If you are still unsure if this seal kit will work for you, call our help hotline at 866-902-6060 and we will be glad to determine what seal kit you need.

This kit came in the following Ben Pearson model lifts and may fit others as well – 9AI 9SI 9SA 10SI 10SIWIDE 10SA12SI 9000a 9000AI 9000SA 9000SI a09 AO mechanical

-HOW LONG DOES IT TAKE??
This kit usually takes less than an hour to install and can be done with a vice, pipe wrench and a few hand tools.

-WHAT THIS KIT WONT’ FIT!
If your cylinder doesn’t have a hex style bleed screw or the internal seals do not match the pictures this seal kit will NOT work with your lift but we offers those seal kits as well by calling us at 866-902-6060

-RETURN POLICY ON SEAL KITS

Our seal kits come in a sealed clear bag. Warning! Do not open bag until your verify you have the right seal kit once your cylinder is torn down. Simply remove your old seals from your cylinder and match them up by holding them next to new seals in bag. If they appear similar inside and outside diameter then you have the correct seals. If your not sure please call us before opening the bag. We will not except returns from open /used seals because you didn’t verify fitment first.

Ben Pearson Brand

Part number 91586 95128 BEN5128 bh-7100-76

Models: 9AI 9SI 9SA 10SI 10SIWIDE 10SA12SI 9000a 9000AI 9SA  9000SI a09 AO mechanical