Need Help? 
Description
Direct Lift YG11-9180 Stick Style Hydraulic Cylinder Seal Kit
When the hydraulic cylinder on your Direct Lift stick style 2-post lift begins to leak, this aftermarket seal kit allows you to rebuild the cylinder without replacing it entirely. Before ordering, confirm your cylinder matches the YG11-9180: the cylinder will have an allen head bleeder screw at the top, and the chrome shaft will exit from the bottom of the cylinder as the lift rises. Stamping numbers on the collar of the cylinder can also be used to verify cylinder identity.
Product Information
- Brand / Equipment: Direct Lift
- Manufacturer / Reference Part Number: YG11-9180
- Store SKU: DIT9180
- Component: Hydraulic Cylinder Seal / Rebuild Kit
- Kit Coverage: Seals for ONE cylinder – order two kits for a complete 2-post lift rebuild
- Lift Capacity: 9000-10000 lb
- Cylinder Style: Stick style (inverted – chrome shaft exits bottom)
- Listed Application: Direct Lift stick style 2-post lifts
Compatible Makes / Verified Fitment Models
- Direct Lift Pro-9D
- Direct Lift Pro-9
- Direct Lift Pro-10 (stick style / direct drive cylinder)
- Direct Lift PV10
- Direct Lift Pro-v10EH
- Direct Lift DL9 (full model: DL9V000BBL)
Replacement / Cross-Reference Numbers
- Replaces: Direct Lift YG11-9180
Fitment and Ordering Notes
Verify your cylinder type before purchasing. The YG11-9180 cylinder is identified by an allen head bleeder screw on top and stamping numbers on the collar. The chrome shaft of this inverted cylinder exits from the bottom as the lift rises. If you are unsure which seal kit your lift requires, call our customer service hotline at 1-866-902-6060 before ordering.
Additional Product Information
Seal kits are shipped in a sealed clear bag. Do not open the bag until you have disassembled your cylinder and can physically compare your old piston seal to the new seals through the bag. If the inside and outside diameters appear similar, you have the correct kit. Opened or used seal kits cannot be returned. Call 866-902-6060 before opening if you have any doubts about fitment.
