Challenger Lift X10-094 Cable, Eq. for 2-Post Car Hoist E10 Pre-2009 2-Post Series

Challenger Lift X10-094 Cable, Eq. for 2-Post Car Hoist E10 Pre-2009 2-Post Series - Image 3

$148.56

Availability: In Stock

SKU: CHR0094AMS

Replacement X10-094 Equalizer Cable (Cable, Eq.) for Challenger E10 (2008 and earlier) 2-Post Lifts. Early X10-series version. long; sold as a pair. Verify serial number before ordering. Confirm fitment with your lift's parts diagram before ordering.

Availability may vary depending on vendor stock.

Description

Challenger X10-094 Equalizer Cable for E10 Pre-2009 2-Post Lift

The X10-094 equalizer cable (Cable, Eq.) synchronizes both sides of the carriage, keeping them at equal height during raising and lowering. Replace when the cable shows fraying, kinking, or when the lift exhibits uneven carriage travel from side to side. This is the early / X10-series version for lifts manufactured prior to approximately May 2008 (serial number 0804 or lower). Verify your lift’s serial number and confirm the correct cable version before ordering. Cables are sold as a pair (2 per order).

Product Information

Brand / Equipment: Challenger Lifts
Manufacturer / Reference Part Number: X10-094
Store SKU: CHR0094AMS
Component: Equalizer Cable (Cable, Eq.)
Sold As: Pair (2 cables per order)
Application Note: Early / X10-series version – for lifts with serial number 0804 or lower (pre-May 2008)
Listed Application: Challenger E10 (2008 and earlier) 2-Post Lifts

Replacement / Cross-Reference Numbers

JSJ5-04-00

Fitment & Ordering Notes

This part is listed for the Challenger E10 (2008 and earlier) 2-post lift series. Verify your lift’s model number and confirm this part number against your lift’s parts diagram or service manual before ordering. If you are unsure of your model, contact our team with your lift’s serial number for assistance.