Need Help? 
Description
Challenger VS10-SK Hydraulic Cylinder Seal Kit for VS-10 2-Post Lift
This seal kit rebuilds the hydraulic cylinders in Challenger VS-10 2-post automotive lifts produced before 2009. VS-10 cylinders are identified by a threaded (NPT-style) pipe fitting screwed into the bottom of the cylinder shaft – not an O-ring boss style fitting. Pre-2009 cylinders also have thread-on style end caps. One kit rebuilds one cylinder; order two kits to rebuild both sides of the lift at the same time.
Product Information
- Brand / Equipment: Challenger Lifts
- Manufacturer / Reference Part Number: VS10-SK
- Store SKU: CHRs10sk
- Component: 2-Post Lift Hydraulic Cylinder Seal / Rebuild Kit (rebuilds one cylinder)
- Listed Application: Challenger VS-10 2-post lift, production before 2009 (serial number starting 0901 or lower), with thread-on style end caps and NPT-style pipe fitting at bottom shaft
Replacement / Cross-Reference Numbers
- Challenger Part Number: VS10-SK
Fitment and Ordering Notes
This kit is for VS-10 cylinders produced before January 2009 (serial number starting 0901 or lower). Confirm your cylinder has NPT-style pipe thread fittings at the bottom shaft (not O-ring boss style) and thread-on style end caps before ordering. If your cylinder has different fittings or a later serial number, a different seal kit may be required. Call 866-902-6060 if you need help identifying the correct kit for your cylinder.
Additional Product Information
Seal kits ship in a sealed clear bag. Do not open the bag until you have removed your old seals and can compare them side by side with the new seals inside the bag. If the inside and outside diameters appear similar, the kit is correct for your cylinder. Opened or used seal kits cannot be returned.
