Challenger Lift X10-084 Carriage Slider Block for 2-Post Car Hoist E10 Pre-2009 2-Post Series

Description

Challenger X10-084 Carriage Slider Block for E10 Pre-2009 2-Post Lift

Carriage slider blocks (also called slide blocks or glide blocks) guide the carriage along the column and absorb lateral forces during raising and lowering. Replace when the block shows significant scoring, cracking, or excessive wear that results in carriage slop or contact noise against the column. Sixteen blocks are used per lift. The X10-084 is a solid, un-slotted plastic block; verify this profile matches your column before ordering.

Product Information

• Brand / Equipment: Challenger Lifts
• Manufacturer / Reference Part Number: X10-084
• Store SKU: CHR0084AMS
• Component: Carriage Slider Block (Slide Block)
• Length: approx. 2-7/8 in. to 2.913 in.
• Width: approx. 1-1/8 in. to 1.42 in.
• Height: approx. 1-1/8 in.
• Material: Solid plastic (un-slotted)
• Quantity per Lift: 16 (8 per column)
• Listed Application: Challenger E10 (2008 and earlier) 2-Post Lifts

Compatible Makes / Verified Fitment Models

• Challenger E10 (2008 and earlier) 2-Post Lift
• Challenger E12 2-Post Lift
• Challenger LE10 2-Post Lift
• Challenger VLE10 2-Post Lift
• Challenger X10 2-Post Lift

Replacement / Cross-Reference Numbers

• JSJ5-08-15

Fitment & Ordering Notes

This part is listed for the Challenger E10 (2008 and earlier) 2-post lift series. Verify your lift’s model number and confirm this part number against your lift’s parts diagram or service manual before ordering. If you are unsure of your model, contact our team with your lift’s serial number for assistance.