Forward Lift 913611 Hex Jam Nut 3/4-16 NF Plated, Cylinder Mount Jam Nut for DP10AN, DP97S2, I10 Lifts

Forward Lift 913611 Hex Jam Nut 3/4-16 NF Plated, Cylinder Mount Jam Nut for DP10AN, DP97S2, I10 Lifts - full parts breakdown

$22.84

Availability: In Stock

SKU: FOD3611

Forward Lift 913611 — Hex Jam Nut 3/4-16 NF Plated, Cylinder Mount Jam Nut for DP10AN, DP97S2, I10 Lifts. Use the part number and listed lift application to confirm compatibility before ordering.

Plated 3/4-16 NF hex jam nut for the cylinder mount on Forward Lift DP10AN, DP97S2 and I10 lifts.

Availability may vary depending on vendor stock.

Description

Forward Lift 913611 Hex Jam Nut 3/4-16 NF Plated, Cylinder Mount Jam Nut for DP10AN, DP97S2, I10 Lifts

Restore reliable hydraulic lift operation with the 913611 Hex Jam Nut 3/4-16 NF Plated, Cylinder Mount Jam Nut, listed for use on DP10AN, DP97S2, I10 Lifts. This component is used when servicing a worn, leaking, or damaged cylinder where this exact part number and application are specified. Compare the part number and listed fitment with your original Forward Lift component before ordering.

Product Information

Brand / Equipment: Forward Lift
Manufacturer / Reference Part Number: 913611
Store SKU: FOD3611
Component: Hex Jam Nut 3/4-16 NF Plated, Cylinder Mount Jam Nut
Listed Application: DP10AN, DP97S2, I10 Lifts

Fitment & Ordering Notes

Automotive lift manufacturers may use different parts across model years, production runs, or equipment revisions. Before ordering, compare the reference part number and the model/application information in this listing with the identification tag, parts manual, or original component on your lift. If your equipment uses a different part number, verify interchange before installation.

Additional Existing Product / Fitment Information

In the drawing images above this is part number 49 in the DP10AN drawing and part number 48 in the DP97S2 drawing and part number 25 in the I10 drawing.

Fits the following lift models — part number 913611 appears in the parts breakdown of each of these lifts: Forward Lift DP10AN, DP97S-2, I10, I10 (111000), INT10, INT9, DP9A-S, DP97S-2 Two-Post, DP09P Two-Post Asymmetric, DP09A-2 Two-Post Asymmetric, DP10 10K Two-Post, DP97A-2 / DP10A-2 Two-Post, DPO7A Two-Post Asymmetric, DPO9S-2 Two-Post Asymmetric.

This thin-profile 3/4-16 fine-thread jam nut locks the hydraulic cylinder mount adjustment on Forward two-post and inground lifts. Run against the main hex nut, it keeps the cylinder mounting hardware from backing off during lift cycles.

Direct OEM replacement for the factory jam nut. Confirm against Figure 17 or Drawing 1 of your parts breakdown before ordering.