Forward Lift 995430 Swing Arm Pin, 8" for DP10AN / DP97S2 / I10 Two-Post Lifts

Forward Lift 995430 Swing Arm Pin, 8" for DP10AN / DP97S2 / I10 Two-Post Lifts location

Forward Lift 995430 Swing Arm Pin, 8" for DP10AN / DP97S2 / I10 Two-Post Lifts - Image 4

$61.52

Availability: In Stock

SKU: FOD5430

Forward Lift 995430 — Swing Arm Pin, 8" for DP10AN / DP97S2 / I10 Two-Post Lifts. Use the part number and listed lift application to confirm compatibility before ordering.

Replacement 995430 8-inch swing arm pin for DP10AN, DP97S2 and I10 two-post lifts. Forward Lift part number 995430.

Availability may vary depending on vendor stock.

Description

Forward Lift 995430 Swing Arm Pin, 8″ for DP10AN / DP97S2 / I10 Two-Post Lifts

Replace missing, worn, or damaged lift hardware with the 995430 Swing Arm Pin, 8″, listed for use on DP10AN / DP97S2 / I10 Two-Post Lifts. This hardware is used when servicing the specified Forward Lift assembly. Match the part number, size or description, and listed application before ordering.

Product Information

Brand / Equipment: Forward Lift
Manufacturer / Reference Part Number: 995430
Store SKU: FOD5430
Component: Swing Arm Pin, 8″
Listed Application: DP10AN / DP97S2 / I10 Two-Post Lifts

Fitment & Ordering Notes

Automotive lift manufacturers may use different parts across model years, production runs, or equipment revisions. Before ordering, compare the reference part number and the model/application information in this listing with the identification tag, parts manual, or original component on your lift. If your equipment uses a different part number, verify interchange before installation.

Additional Existing Product / Fitment Information

In the drawing images above this is part number 36 in the DP10AN drawing and part number 35 in the DP97S2 drawing and part number 80 in the I10 drawing.

Fits the following lift models — part number 995430 appears in the parts breakdown of each of these lifts: Forward Lift DP10AN, DP97S-2, I10, I10 (111000), INT10, INT9, DP9A-S, DP97S-2 Two-Post, DP09P Two-Post Asymmetric, DP09A-2 Two-Post Asymmetric, DP10 10K Two-Post, DP97A-2 / DP10A-2 Two-Post, DPO7A Two-Post Asymmetric, DPO9S-2 Two-Post Asymmetric.

Replacement 8″ swing arm pin fitting DP10AN, DP97S2 and I10 two-post lifts. Referenced in the carriage safety latch / arm lock assembly drawings (Drawing 2), Drawing 1 of the DP09A-2 main lift assembly, and Figure 17 of the I10 parts breakdown.

The swing arm pin is the pivot that attaches each lift arm to the carriage, carrying the vehicle load while allowing the arm to swing for positioning. Worn arm pins cause noticeable arm slop and uneven pad contact, and should be replaced during arm or restraint gear service.

Direct replacement part. Note that a different arm pin (995430 / DP9-5300) applies to newer DP10 lifts with lock covers, so verify your model and drawing reference before ordering.

Cross-check part number: Forward Lift 995430. This is a Forward Lift replacement part.