Direct Lift Lift Part B11-8×15 Hex Head Bolt M8×15 for PRO9F 9K Floor Plate Lift

Description

Direct Lift Lift Part B11-8×15 Hex Head Bolt M8×15 for PRO9F 9K Floor Plate Lift

Replace missing, worn, or damaged lift hardware with the Lift Part B11-8×15 Hex Head Bolt M8×15, listed for use on PRO9F 9K Floor Plate Lift. This hardware is used when servicing the specified Direct Lift assembly. Match the part number, size or description, and listed application before ordering.

Product Information

• Brand / Equipment: Direct Lift
• Store SKU: DITB118
• Component: Lift Part B11-8×15 Hex Head Bolt M8×15
• Listed Application: PRO9F 9K Floor Plate Lift

Fitment & Ordering Notes

Automotive lift manufacturers may use different parts across model years, production runs, or equipment revisions. Before ordering, compare the reference part number and the model/application information in this listing with the identification tag, parts manual, or original component on your lift. If your equipment uses a different part number, verify interchange before installation.

Additional Existing Product / Fitment Information

This is part number 95 in the drawing image above.

Fits the following lift models — part number B11-8×15 appears in the parts breakdown of each of these lifts: Direct Lift PRO-9F 9K Floor Plate, PRO-9F.

Replacement M8×15 hex head bolt for the PRO9F 9K floor plate two-post lift.

This bolt is called out in Drawing 3 (two-post column / base / runway assembly, p.25) of the PRO9F parts breakdown, securing column, base and runway hardware.

Direct replacement for the factory M8×15 hex bolt shown in the PRO9F breakdown. Verify the Drawing 3 callout before ordering.

Cross-check part number: Direct Lift B11-8×15. This is a Direct Lift replacement part.