Forward Lift H4P-1008 X-Beam Sheave Spacer for CR14 14000EWT 4-Post Lift

Description

Forward Lift H4P-1008 X-Beam Sheave Spacer for CR14 14000EWT 4-Post Lift

Keep the lift cable and movement system operating correctly with the H4P-1008 X-Beam Sheave Spacer, listed for use on CR14 14000EWT 4-Post Lift. Use this part when servicing the corresponding Forward Lift assembly and verify the reference part number and application before ordering.

Product Information

• Brand / Equipment: Forward Lift
• Manufacturer / Reference Part Number: H4P-1008
• Store SKU: FOD1008
• Component: X-Beam Sheave Spacer
• Listed Application: CR14 14000EWT 4-Post Lift

Fitment & Ordering Notes

Automotive lift manufacturers may use different parts across model years, production runs, or equipment revisions. Before ordering, compare the reference part number and the model/application information in this listing with the identification tag, parts manual, or original component on your lift. If your equipment uses a different part number, verify interchange before installation.

Additional Existing Product / Fitment Information

This is part number 4.11 in the drawing image above.

This sheave spacer fits the Direct Lift CR14 (14000EWT) 14,000 lb four-post lift, serial series 994359-9-20071, per Table 6-8, the master complete parts listing.

The spacer locates the cable sheave on its shaft within the cross beam so the sheave spins true and the lifting cable stays aligned in its groove. Worn spacers allow side play that chews up both sheave and cable, so they should be renewed whenever the sheave or sheave pin is replaced.

Genuine Direct Lift HI Parts replacement. Commonly ordered with sheave H4P-1007 and sheave pin H4P-1009.

Cross-check part number: Forward Lift H4P-1008. This is a Forward Lift replacement part.