Forward Lift H4P-1009 X-Beam Sheave Pin / Shaft for CR14 14000EWT 4-Post Lift

Description

Forward Lift H4P-1009 X-Beam Sheave Pin / Shaft for CR14 14000EWT 4-Post Lift

Keep the lift cable and movement system operating correctly with the H4P-1009 X-Beam Sheave Pin / Shaft, listed for use on CR14 14000EWT 4-Post Lift. Use this part when servicing the corresponding Forward Lift assembly and verify the reference part number and application before ordering.

Product Information

• Brand / Equipment: Forward Lift
• Manufacturer / Reference Part Number: H4P-1009
• Store SKU: FOD1009
• Component: X-Beam Sheave Pin / Shaft
• Listed Application: CR14 14000EWT 4-Post Lift

Fitment & Ordering Notes

Automotive lift manufacturers may use different parts across model years, production runs, or equipment revisions. Before ordering, compare the reference part number and the model/application information in this listing with the identification tag, parts manual, or original component on your lift. If your equipment uses a different part number, verify interchange before installation.

Additional Existing Product / Fitment Information

This is part number 4.6 in the drawing image above.

This is the X-beam sheave pin (sheave shaft) for the Direct Lift CR14 (14000EWT) 14,000 lb four-post lift, serial series 994359-9-20071, listed in the Table 6-8 master parts listing.

The pin is the axle the cross beam cable sheave rotates on at the beam ends. A grooved or worn pin lets the sheave wobble, misaligning the lifting cable and accelerating wear on both. Inspect the pin any time cables or sheaves are serviced and replace it if wear is visible.

Genuine Direct Lift HI Parts replacement. Typically replaced together with sheave H4P-1007 and spacer H4P-1008, and retained with lock hardware per the parts breakdown.

Cross-check part number: Forward Lift H4P-1009. This is a Forward Lift replacement part.