Rotary Lift FJ7382-34 Zinc-Plated Latch Shaft for DL9, DP10, I10 Two-Post Lifts

Description

Rotary Lift FJ7382-34 Zinc-Plated Latch Shaft for DL9, DP10, I10 Two-Post Lifts

Repair or service the applicable lift assembly with the FJ7382-34 Zinc-Plated Latch Shaft, listed for use on DL9, DP10, I10 Two-Post Lifts. Use the reference part number and listed Rotary Lift application to compare against the original component before ordering.

Product Information

• Brand / Equipment: Rotary Lift
• Manufacturer / Reference Part Number: FJ7382-34
• Store SKU: ROY8234
• Component: Zinc-Plated Latch Shaft
• Listed Application: DL9, DP10, I10 Two-Post Lifts

Fitment & Ordering Notes

Automotive lift manufacturers may use different parts across model years, production runs, or equipment revisions. Before ordering, compare the reference part number and the model/application information in this listing with the identification tag, parts manual, or original component on your lift. If your equipment uses a different part number, verify interchange before installation.

Additional Existing Product / Fitment Information

This is part number 6 in the drawing image above.

Fits the following lift models — part number FJ7382-34 appears in the parts breakdown of each of these lifts: Rotary Lift DL9, DP10 (new style with lock covers), I10N000M, TL07.

The FJ7382-34 is a zinc-plated latch shaft used in the locking latch assemblies of the DL9, DP10 (new style with lock covers), and I10 (I10N000M) two-post automotive lifts. It appears in the Locking Latch Detail diagrams for both the left and right columns.

The latch shaft is the pivot on which the mechanical safety lock rotates as it engages and releases the column lock positions. A worn, bent, or corroded latch shaft can cause the safety latch to bind or fail to seat fully, which is a serious safety concern, so it should be replaced during any latch service.

This is an OEM-style replacement matched to the locking latch detail in your parts breakdown. Check the item number in your column’s latch diagram before ordering.

Cross-check part number: Rotary FJ7382-34. This is a Rotary replacement part.

Fits these lifts:

• Direct Lift — DL9 (9,000 lb two-post)
• Hanmecson (VSG) — DL9
• Forward Lift — DP10 (new style with lock covers); I10 (I10N000M); TLO7 (300 series two-post)
• Rotary Lift — interchange P/N FJ7382-34