Direct Lift B52-4×45 Cotter Pin 4mm x 45mm for Pro 14F 14,000 lb Lift Rolling Jack

Description

Direct Lift B52-4×45 Cotter Pin 4mm x 45mm for Pro 14F 14,000 lb Lift Rolling Jack

Replace missing, worn, or damaged lift hardware with the B52-4×45 Cotter Pin 4mm x 45mm, listed for use on Pro 14F 14,000 lb Lift Rolling Jack. This hardware is used when servicing the specified Direct Lift assembly. Match the part number, size or description, and listed application before ordering.

Product Information

• Brand / Equipment: Direct Lift
• Manufacturer / Reference Part Number: B52-4×45
• Store SKU: DIT2445
• Component: Cotter Pin 4mm x 45mm
• Listed Application: Pro 14F 14,000 lb Lift Rolling Jack

Fitment & Ordering Notes

Automotive lift manufacturers may use different parts across model years, production runs, or equipment revisions. Before ordering, compare the reference part number and the model/application information in this listing with the identification tag, parts manual, or original component on your lift. If your equipment uses a different part number, verify interchange before installation.

Additional Existing Product / Fitment Information

This is part number 48 in the drawing image above.

Fits the Pro 14F 14,000 lb lift, shown in FIG. 15, Rolling Jack Assembly, of the parts breakdown.

This 4mm x 45mm cotter pin locks clevis pins and hardware within the rolling jack mechanism, preventing them from backing out during use.

Direct replacement for the pin called out in FIG. 15. Cotter pins are single-use hardware; install new whenever the assembly is serviced. Verify the figure callout before ordering.

Cross-check part number: Direct Lift B52-4×45. This is a Direct Lift replacement part.