Description
This kit came in the following Challenger/ VBM Models 20000, 21000, 26000, 27000, 28000, 30000, 31000, 33000, 35000.
OEM Part Number: 11062 , 200012
Alt Part Number: BH-7225-06
-HOW TO IDENTIFY YOUR CYLINDER:
Challenger Pacoma chain over cylinder will be marked with Made in Germany or Pacoma and comes apart at the bottom of the cylinder and has a chain that goes over the top of it This cylinder is unique in that the bottom of the cylinder is the screw out gland not the top. The cylinder may also have Massey Ferguson stamped on it as well. You may need a flash light and some light sandpaper to read the stamping off the cylinder. The Main seal is 2 piece seal.
Other Notes: The cylinder will have a 2.5″ BORE x 36.5″STROKE
Chain over: There will be a roller and chain on top of you cylinder. Your lift can still have cables and your cylinder can be a chain over.
-WHAT THIS KIT WONT’ FIT:
Challenger Auto Lifts stick cylinder , other models not listed, different stamped numbers or different serial number if specified
-RETURN POLICY ON SEAL KITS
Our seal kits come in a sealed clear bag. Warning! Do not open bag until your verify you have the right seal kit once your cylinder is torn down. Simply remove your old seals from your cylinder and match them up by holding them next to new seals in bag. If they appear similar inside and outside diameter then you have the correct seals. If your not sure please call us before opening the bag. We will not except returns from open /used seals because you didn’t verify fitment first.
Call our customer service hotline @ 866-902-6060 if you need help identifying which seal kit is best for you!
Need Help? 
