Forward Lift 991070 PAL Cap Nut 3/16" - Carriage Safety Latch for DP10AN, DP97S-2, I10 Lifts

$14.53

Availability: In Stock

SKU: FOD1070

Forward Lift 991070 — PAL Cap Nut 3/16" - Carriage Safety Latch for DP10AN, DP97S-2, I10 Lifts. Use the part number and listed lift application to confirm compatibility before ordering.

Genuine Forward Lift 3/16" PAL-style cap nut (Item #991070) for the carriage safety latch on DP10AN, DP97S-2 and I10 two-post lifts.

Availability may vary depending on vendor stock.

Description

Forward Lift 991070 PAL Cap Nut 3/16" – Carriage Safety Latch for DP10AN, DP97S-2, I10 Lifts

Replace missing, worn, or damaged lift hardware with the 991070 PAL Cap Nut 3/16" – Carriage Safety Latch, listed for use on DP10AN, DP97S-2, I10 Lifts. This hardware is used when servicing the specified Forward Lift assembly. Match the part number, size or description, and listed application before ordering.

Product Information

Brand / Equipment: Forward Lift
Manufacturer / Reference Part Number: 991070
Store SKU: FOD1070
Component: PAL Cap Nut 3/16" – Carriage Safety Latch
Listed Application: DP10AN, DP97S-2, I10 Lifts

Fitment & Ordering Notes

Automotive lift manufacturers may use different parts across model years, production runs, or equipment revisions. Before ordering, compare the reference part number and the model/application information in this listing with the identification tag, parts manual, or original component on your lift. If your equipment uses a different part number, verify interchange before installation.

Additional Existing Product / Fitment Information

In the drawing images above this is part number 13 in the DP10AN drawing and part number 13 in the DP97S2 drawing and part number 52 in the I10 drawing.

Fits the following lift models — part number 991070 appears in the parts breakdown of each of these lifts: Forward Lift DP10AN, DP97S-2, I10, I10 (111000), INT10, INT9, DP9A-S, DP97S-2 Two-Post, DP09P Two-Post Asymmetric, DP09A-2 Two-Post Asymmetric, DP10 10K Two-Post, DP12-2 / DP15-2 12K, DP97A-2 / DP10A-2 Two-Post, DPO7A Two-Post Asymmetric, DPO9S-2 Two-Post Asymmetric; Direct Lift HR-8000 8K Floor Plate, OH-8000 8K Overhead.

This 3/16″ PAL-style push-on cap nut is part of the carriage safety latch assembly, shown in the safety latch drawings on all three fitment models. It retains the latch hardware on its shaft, keeping the carriage safety latch, a primary load-holding safety device, properly assembled.

OEM-spec replacement (alternate sourcing may apply). Because this fastener secures a safety-critical latch component, use the correct replacement rather than a generic nut.

Cross-check part number: Forward Lift 991070. This is a Forward Lift replacement part.