Forward Lift H4P-1001 Top Cover, Cross Beam Ends for CR14 14000EWT (Replaces H4P-1001FWD)

Description

Forward Lift H4P-1001 Top Cover, Cross Beam Ends for CR14 14000EWT (Replaces H4P-1001FWD)

The H4P-1001 Top Cover, Cross Beam Ends is listed for use on CR14 14000EWT (Replaces H4P-1001FWD) and is intended for service or repair of compatible Forward Lift equipment. Match the reference part number, component description, and listed application to your original lift part before ordering.

Product Information

• Brand / Equipment: Forward Lift
• Manufacturer / Reference Part Number: H4P-1001
• Store SKU: FODP1001
• Component: Top Cover, Cross Beam Ends
• Listed Application: CR14 14000EWT (Replaces H4P-1001FWD)

Fitment & Ordering Notes

Automotive lift manufacturers may use different parts across model years, production runs, or equipment revisions. Before ordering, compare the reference part number and the model/application information in this listing with the identification tag, parts manual, or original component on your lift. If your equipment uses a different part number, verify interchange before installation.

Additional Existing Product / Fitment Information

This is part number 4.4 in the drawing image above.

This top cover fits the ends of the cross beam on the Direct Lift CR14 (14000EWT) 14,000 lb four-post lift, serial series 994359-9-20071. It is listed in Table 6-8, the master complete parts listing for the lift.

The cover caps the cross beam end where the sheave and latch hardware ride, keeping debris out of the mechanism and protecting the cables and latch components at the beam ends. Replace it if the original is bent, missing, or damaged after service work on the beam.

Genuine Direct Lift HI Parts replacement. This part supersedes and replaces the older part number H4P-1001FWD, so order this number for both.

Cross-check part number: Forward Lift H4P-1001. This is a Forward Lift replacement part.