Direct Lift VT12-2008 Slider Block for I12 / F12 12,000 lb. Two-Post Lifts

Description

Direct Lift VT12-2008 Slider Block for I12 / F12 12,000 lb. Two-Post Lifts

The VT12-2008 Slider Block is listed for use on I12 / F12 12,000 lb. Two-Post Lifts and is intended for service or repair of compatible Direct Lift equipment. Match the reference part number, component description, and listed application to your original lift part before ordering.

Product Information

• Brand / Equipment: Direct Lift
• Manufacturer / Reference Part Number: VT12-2008
• Store SKU: DIT22008
• Component: Slider Block
• Listed Application: I12 / F12 12,000 lb. Two-Post Lifts

Fitment & Ordering Notes

Automotive lift manufacturers may use different parts across model years, production runs, or equipment revisions. Before ordering, compare the reference part number and the model/application information in this listing with the identification tag, parts manual, or original component on your lift. If your equipment uses a different part number, verify interchange before installation.

Additional Existing Product / Fitment Information

This is part number 50 in the drawing image above.

Fits the following lift models — part number VT12-2008 appears in the parts breakdown of each of these lifts: Rotary Lift I12 Pro; F12 / I12.

Replacement slider block for Direct Lift 12,000 lb. two-post lifts, fitting the I12 Pro and F12/I12 series.

Shown in the Main Lift Assembly and Main Parts List / Main Exploded Assembly (pages 2-3), slider blocks are the wear guides between the carriage and the inside of the column, letting the carriage travel smoothly up and down. They are a normal wear item; worn slider blocks cause carriage slop, noise and uneven travel and should be replaced as a routine maintenance job.

Direct OEM-style replacement for the listed models. Confirm quantity needed per carriage against your parts breakdown before ordering.