Hydraulic Cylinder for Rotary Lift N342 & N380 SPOA9 SPOA7 SPOA10

Hydraulic Cylinder for Rotary Lift N380 & N342 SPOA9 SPOA7 SPOA10 2 Post Car Hoist Ram

Hydraulic Cylinder for Rotary Lift N380 & N342 SPOA9 SPOA7 SPOA10 2 Post Car Hoist Ram - Image 3

$948.00

Availability: In Stock

SKU: roy46KIT

Replacement Cylinder for Rotary Lift 2 post and inground lifts for 7-10k lifts

Replaces Rotary N380 N342 N346KIT N380E and N380Y

Found in the following:

2 Post Models Including SPOA7-300 SPOA7-400, SPOA9-300 to 700 series , SPO9-300 to 700 series, SPOA10-300 to 700 series,
TLO7-300 to 500 series SPO12-310 to 710series (including EH-1, EH-2 and EH-4 versions of these lifts), SPO10-500 to 700 series , SPOA10-
500 to 700 series.

Inground models including SL29-300 series

Please read full description below before ordering.

Description

This is a single replacement hydraulic cylinder that will fit on many ROTARY 2 Post Auto Lifts and inground 2 post hoists. This aftermarket cylinder will meet or exceed factory specifications.

Your Model Number must match the following:

2 Post Models Including SPOA7-300 SPOA7-400, SPOA9-300 to 700 series , SPO9-300 to 700 series, SPOA10-300 to 700 series,
TLO7-300 to 500 series SPO12-310 to 710series (including EH-1, EH-2 and EH-4 versions of these lifts), SPO10-500 to 700 series , SPOA10-
500 to 700 series.

Inground models including SL29-300 series

NOTE – SOME MODELS ABOVE HAVE NEWER VERSION OF THEIR LIFT THAT MAY USE DIFFERENT CYLINDERS. LOOK FOR STAMPING NUMBER AS DESCRIBED BELOW TO MAKE SURE THIS IS THE RIGHT CYLINDER FOR YOUR LIFT BEFORE ORDERING.

-HOW TO IDENTIFY YOUR CYLINDER IS A N380 OR N342

ALL ROTARY CYLINDERS ARE STAMPED WITH THEIR PART NUMBER. YOUR CYLINDER SHOULD BE STAMPED “N380” OR “N342” ON THE OUTER TUBE / HOUSING OF THE CYLINDER

Replaces ROTARY LIFT N380 N342 N346KIT N380E and N380Y

ALT part number roy46KIT BH-7545-14

WE ALSO SELL CYLINDER REBUILD KITS FOR MANY DIFFERENT BRAND AUTO LIFTS AND WE OFFER MANY OTHER PARTS AS WELL-

HAVE QUESTIONS CALL US AT 866-902-6060

NOTE : WHEN REPLACEING A CYLINDER IN YOUR LIFT , YOU NEED TO REMOVE THE OIL RESERVOIR FROM YOUR LIFT, DISPOSE OF THE OLD OIL, CLEAN THE TANK OUT AND FLUSH THE SYSTEM OF DEBRIS AND OLD OIL TO PREVENT VOIDING THE 90 DAY WARRANTY ON THESE CYLINDERS . PLEASE ENSURE YOUR HYDRAULIC IS SYSTEM IS CLEAN BEFORE INSTALLING THE CYLINDER.

The parts we offer in this listing are an O.E.M. part or an OEM alternative