Need Help? 
Description
This is the Over Cylinder lifting chain for Forward 2 post lift Models 9000B, 9000FP, 8000A, BP9000 ETL with chains attached to the Bottom of the column and to the inside of the Lifting carriage. This chain attaches to the bottom of the post – runs up over the roller on the hydraulic cylinder – then back down and attaches inside of the lifting carriage. These chains can wear out. The pins that hold each link together can spin and links can break, also when a roller fails it can break or wear out the chain’s links.
When replacing your chain always replace the entire chain from end to end and always inspect your rollers that the chain rides on to ensure they are rolling freely and are not warn out in the center.
This chain is found on Forward hoist models 9000B, 9000FP, 8000A, BP9000 ETL
(NOTE: the chain is 8 links thick and measure 3/4″ from pin to pin – PLEASE VERIFY BEFORE ORDERING.
Replaces Forward Part # 992613
Alternate Part #FOD2613
Note: Forward 2 Post chain lifts have various configurations. This is the chain running from the base of the column over cylinder then back into carriage. See our listings for other model chains. This chain may need to be cut down depending on how level your floor is.
Need more parts for a forward 2 post chain lift or have question about this part? Call us at 866-902-6060.
