Need Help? 
Description
Rotary FJ7604-12TH Hydraulic Cylinder Seal Kit for Texas Hydraulic 2-Post Lifts
This seal kit rebuilds one Texas Hydraulics hydraulic cylinder found in Rotary 2-post lifts. If your cylinder leaks or fails, you must first confirm it is a Texas Hydraulics cylinder before ordering. Look approximately 6 inches below the bleeder screw near the top of the cylinder for ID stampings. The cylinder should read FJ7604 followed by “TXT” or “TH” followed by numbers. If you see the word “PACOMA” or “MADE IN GERMANY” your cylinder is not a Texas Hydraulic and this kit will not fit – a separate Pacoma seal kit is available for those cylinders.
Product Information
- Brand / Equipment: Rotary
- Manufacturer / Reference Part Number: FJ7604-12TH
- Store SKU: ROY0412th
- Component: Hydraulic Cylinder Seal Kit / Packing Kit
- Cylinder Type: Texas Hydraulics
- Capacity: 12,000 – 18,000 lb 2-post lift cylinders
- Kits per Lift: This kit rebuilds ONE cylinder – order TWO kits to rebuild both cylinders
- Listed Application: Rotary 2-Post Lift Models SPO12, SPO15, SPO18
Fitment and Ordering Notes
Verify your cylinder is a Texas Hydraulics unit before ordering. Look approximately 6 inches below the bleeder screw near the top of the cylinder for ID stampings – the cylinder should read FJ7604 followed by “TXT” or “TH” followed by numbers. If the stampings read “PACOMA” or “MADE IN GERMANY”, this kit will not fit. If you are unsure which seal kit you need, call our help hotline at 866-902-6060 before ordering.
Additional Product Information
This kit usually takes less than an hour to install and can be done with a vise, pipe wrench, and a few hand tools. Our seal kits come in a sealed clear bag. Do not open the bag until you verify you have the right seal kit once your cylinder is torn down. Remove your old seals from your cylinder and match them up by holding them next to the new seals in the bag. If they appear similar in inside and outside diameter, you have the correct seals. If you are not sure, call us before opening the bag. We will not accept returns on open or used seals because fitment was not verified first. Call our customer service hotline at 866-902-6060 if you need help identifying which seal kit is best for you.
