ALM Auto Lift Hydraulic Cylinder Rebuild Seal Kit X00441 Chainover Cylinder

Description

ALM Lift Seal Kit for ALM 2 Post hydraulic cylinder.

This is 1 seal kit for the hydraulic cylinders found in the ALM 2 Post Car Lift Model 9003A, chainover cylinders.   It meets or exceeds factory specs. It fits lifts with capacity of 9000 pounds. 

-HOW TO IDENTIFY YOUR CYLINDER IS THE CORRECT ONE FOR THIS SEAL KIT
 Look 6″ below the bleeder screw near the top of the cylinder to see ID stampings. It should be stamped with combination of Letters and/or Numbers.  If you are still unsure if this seal kit will work for you, call our help hotline above and we will be glad to determine what seal kit you need.

This kit came in the following model lifts and may fit others as well… ALM Lift:  9003A 

Part Number –  OEM Part#: X00441

-HOW LONG DOES IT TAKE??
This kit usually takes less than an hour to install and can be done with a vice, pipe wrench and a few hand tools.

OEM Part#: X00441

Alternate part numbers associated with this kit are: BH-7152-36.

If you are unsure about what seal kit you need.

   Call us at 866-902-6060 before ordering.

-RETURN POLICY ON SEAL KITS
Our seal kits come in a sealed clear bag. Warning! Do not open bag until your verify you have the right seal kit once your cylinder is torn down. Simply remove your old seals from your cylinder and match them up by holding them next to new seals in bag. If they appear similar inside and outside diameter then you have the correct seals. If your not sure please call us before opening the bag. We will not except returns from open /used seals because you didn’t verify fitment first.