Challenger Lift a1078 Arm Pin Assembly CL-9 for 2-Post Car Hoist C10/CL-9/CL-10 2-Post Lift

$43.56

Availability: In Stock

SKU: CHR1078AMS

Challenger Lift A1078 / B1078 arm pin assembly for 2-post lifts. Replaces the pivot pin connecting swing arms to the carriage on CL-9, CL-10, and related models. Approximately 6 inches long x 1.5 inches diameter.

Availability may vary depending on vendor stock.

Description

Challenger Lift A1078 Arm Pin Assembly for C10/CL-9/CL-10 2-Post Car Hoist

The Challenger Lift A1078 arm pin assembly is the connecting pin that secures the swing arm to the lift column carriage on CL-series 2-post lifts. The arm pin passes through the arm pivot point, allowing the swing arms to rotate outward for vehicle positioning while remaining firmly anchored to the carriage. Arm pins are subject to wear and corrosion from environmental exposure; a worn or corroded pin can introduce play in the arm pivot, affecting safe vehicle positioning. This assembly replaces the original A1078 and the later B1078 designation.

Product Information

Brand/Equipment: Challenger Lifts
Manufacturer PN: A1078 (also referenced as B1078)
Store SKU: CHR1078AMS
Component: Arm Pin Assembly
Approximate Dimensions: 6 inches length x 1.5 inches diameter
Weight: Approximately 2 lbs
Listed Application: C10/CL-9/CL-10 2-Post Lift

Compatible Makes / Verified Fitment Models

Challenger CL9
Challenger CL10
Challenger B2900V
Challenger 37000, 39000, 26000 series

Replacement / Cross-Reference Numbers

A1078 (original Challenger PN)
B1078 (updated Challenger PN)
31134 (older cross-reference)

Fitment and Ordering Notes

Verify your specific lift model and serial number against the Challenger CL9 or CL10 parts diagram before ordering. Inspect the arm pivot bore and carriage holes for wear when replacing the pin – if the bore is elongated, additional components may need replacement. Replace arm pins in pairs on the same lift post for balanced wear.