Direct Lift B30-27x2 M27x2 Hex Nut for 8K 4-Post Parking & PP8+ Lifts

Description

Direct Lift B30-27×2 M27x2 Hex Nut for 8K 4-Post Parking & PP8+ Lifts

Replace missing, worn, or damaged lift hardware with the B30-27×2 M27x2 Hex Nut, listed for use on 8K 4-Post Parking & PP8+ Lifts. This hardware is used when servicing the specified Direct Lift assembly. Match the part number, size or description, and listed application before ordering.

Product Information

• Brand / Equipment: Direct Lift
• Manufacturer / Reference Part Number: B30-27×2
• Store SKU: DIT0272
• Component: M27x2 Hex Nut
• Listed Application: 8K 4-Post Parking & PP8+ Lifts

Fitment & Ordering Notes

Automotive lift manufacturers may use different parts across model years, production runs, or equipment revisions. Before ordering, compare the reference part number and the model/application information in this listing with the identification tag, parts manual, or original component on your lift. If your equipment uses a different part number, verify interchange before installation.

Additional Existing Product / Fitment Information

This is part number 41 in the drawing image above.

Fits the following lift models — part number B30-27×2 appears in the parts breakdown of each of these lifts: Direct Lift 8K Four-Post Parking, PP8+ 8K Four-Post.

This M27x2 hex nut is shown in the Cylinder & Cable Components assembly, Figure #6 of both breakdowns. It is used within the hydraulic cylinder and lifting cable hardware on these four-post lifts.

Direct replacement for the factory fastener. Verify the Figure #6 item location and 2.0 thread pitch before ordering.

Cross-check part number: Direct Lift B30-27×2. This is a Direct Lift replacement part.

Fits these lifts:

• Direct Lift — PP8+ Long (8,000 lb four-post); DP8 (8,000 lb four-post parking); PP8+ (8,000 lb four-post)