Direct Lift B41-8 Flat Washer 8mm (M8) for CR14, I12, I12 Pro & 6K Mid Rise Lifts

Description

Direct Lift B41-8 Flat Washer 8mm (M8) for CR14, I12, I12 Pro & 6K Mid Rise Lifts

Replace missing, worn, or damaged lift hardware with the B41-8 Flat Washer 8mm (M8), listed for use on CR14, I12, I12 Pro & 6K Mid Rise Lifts. This hardware is used when servicing the specified Direct Lift assembly. Match the part number, size or description, and listed application before ordering.

Product Information

• Brand / Equipment: Direct Lift
• Manufacturer / Reference Part Number: B41-8
• Store SKU: DITB418
• Component: Flat Washer 8mm (M8)
• Listed Application: CR14, I12, I12 Pro & 6K Mid Rise Lifts

Fitment & Ordering Notes

Automotive lift manufacturers may use different parts across model years, production runs, or equipment revisions. Before ordering, compare the reference part number and the model/application information in this listing with the identification tag, parts manual, or original component on your lift. If your equipment uses a different part number, verify interchange before installation.

Additional Existing Product / Fitment Information

In the drawing images above this is part number 15 in the CR14114000 SER# 00N drawing and part number 31 in the I12-Parts drawing and part number 23 in the I12pro parts drawing.

Fits the following lift models — part number B41-8 appears in the parts breakdown of each of these lifts: Direct Lift CR14 14000 (serial 00N), I12, 10K Two-Column, 8K Two-Column Automotive, 7K Four-Post Parking, 8K Four-Post Parking, 9K Parking (wide version), BP9 Floor Plate, HR-8000 8K Floor Plate, Mid-Rise 6K (2005), OH-8000 8K Overhead, PP8+ 8K Four-Post, PP8+ Long 8K Four-Post, PP8S 8K Four-Post, PP9+ 9K Four-Post, PRO-9D 9K Two-Column, PRO-9F 9K Floor Plate, PRO-10 / PROV10 / PV10 (new style), PRO-14F (newer, 3-bolt lock), PROV12 / PRO-12, PV12, HR-8000, PRO-14F 14K, PRO-9F, PROV10 (early); Rotary Lift I12 Pro; F12 / I12, PRO-9D.

This 8mm flat washer is used throughout the runway components of these lifts, shown in the Main Side Runway Components diagram (Figure 4) and the 6K Mid Rise full exploded view. Flat washers distribute clamping load under bolt heads and nuts, protecting mounting surfaces and keeping fasteners tight on runway and structural hardware.

Direct-fit OEM replacement washer for the Light Duty Direct / HI Parts family. Match this part against your lift’s parts breakdown (Figure 4, Runway Components) to confirm fitment before ordering.

Fits these lifts:

• Direct Lift — PP8+ Long (8,000 lb four-post); 7K four-post parking lift; DP8 (8,000 lb four-post parking); HR8000 (8,000 lb floor-plate two-post); I12 (12,000 lb two-post); PP8+ (8,000 lb four-post)
• Forward Lift — CR14 (CR14114000, serial 00N); I12PRO (12,000 lb two-post); F12 / I12 (12,000 lb two-post)