Forward Lift B52-4 x 40 Cotter Pin 4mm x 40mm for CR14 / CRA14 Lift Yoke End

Description

Forward Lift B52-4 x 40 Cotter Pin 4mm x 40mm for CR14 / CRA14 Lift Yoke End

Replace missing, worn, or damaged lift hardware with the B52-4 x 40 Cotter Pin 4mm x 40mm, listed for use on CR14 / CRA14 Lift Yoke End. This hardware is used when servicing the specified Forward Lift assembly. Match the part number, size or description, and listed application before ordering.

Product Information

• Brand / Equipment: Forward Lift
• Manufacturer / Reference Part Number: B52-4
• Store SKU: FODB524
• Component: x 40 Cotter Pin 4mm x 40mm
• Listed Application: CR14 / CRA14 Lift Yoke End

Fitment & Ordering Notes

Automotive lift manufacturers may use different parts across model years, production runs, or equipment revisions. Before ordering, compare the reference part number and the model/application information in this listing with the identification tag, parts manual, or original component on your lift. If your equipment uses a different part number, verify interchange before installation.

Additional Existing Product / Fitment Information

This is part number 8 in the drawing image above.

Fits the following lift models — part number B52-4 X 40 appears in the parts breakdown of each of these lifts: Forward Lift CRA14, CR14 (newer).

This 4mm x 40mm cotter pin is shown in the Yoke End Detail (page 4, upper exploded view) of the CR14/CRA14 parts breakdown. It locks yoke-end and clevis hardware in place, preventing pins from working loose under the repeated loading of lift operation.

OEM replacement from the Light Duty Direct / HI Parts family. Fit a new cotter pin whenever the yoke hardware is disassembled. Confirm the Yoke End Detail callout in your breakdown before ordering.

Cross-check part number: Forward Lift B52-4 x 40. This is a Forward Lift replacement part.