Rotary 41411 Truarc #5304-75 Klipring Snap Ring for 3/4" Shaft - DL9, DP10 & I10

Description

Rotary 41411 Truarc #5304-75 Klipring Snap Ring for 3/4" Shaft – DL9, DP10 & I10

Replace missing, worn, or damaged lift hardware with the 41411 Truarc #5304-75 Klipring Snap Ring, listed for use on 3/4" Shaft – DL9, DP10 & I10. This hardware is used when servicing the specified Rotary Lift assembly. Match the part number, size or description, and listed application before ordering.

Product Information

• Brand / Equipment: Rotary Lift
• Manufacturer / Reference Part Number: 41411
• Store SKU: FOD1411
• Component: Truarc #5304-75 Klipring Snap Ring
• Listed Application: 3/4" Shaft – DL9, DP10 & I10

Fitment & Ordering Notes

Automotive lift manufacturers may use different parts across model years, production runs, or equipment revisions. Before ordering, compare the reference part number and the model/application information in this listing with the identification tag, parts manual, or original component on your lift. If your equipment uses a different part number, verify interchange before installation.

Additional Existing Product / Fitment Information

In the drawing images above this is part number 13, 10 and 9 in the DL9 parts drawing and part number 15, 10 and 9 in the DP10-Parts new style w lock covers drawing and part number 15, 10 and 9 in the I10N000M drawing.

Fits the following lift models — part number 41411 appears in the parts breakdown of each of these lifts: Rotary Lift DL9, DP10 (new style with lock covers), I10N000M, I12 Pro, TL07; F12 / I12.

Rotary light-duty two-post replacement retaining ring fitting the DL9, DP10 (new style with lock covers), and I10N000M, shown in the Locking Latch Detail (left column) and Main Lift Assembly (Drawing 1) breakdowns.

The klipring snaps onto a 3/4″ shaft to keep latch shafts and pins from sliding out of their bores while the safety latch pivots freely. Replace any ring that has lost tension or been deformed during removal.

OEM-compatible replacement for part number 41411 (Truarc #5304-75), alternate-sourced to OEM spec.

Fits these lifts:

• Direct Lift — DL9 (9,000 lb two-post)
• Hanmecson (VSG) — DL9
• Forward Lift — DP10 (new style with lock covers); I10 (I10N000M); I12PRO (12,000 lb two-post); F12 / I12 (12,000 lb two-post); TLO7 (300 series two-post)
• Rotary Lift — interchange P/N 41411