Tuxedo / Duro 2 Post Complete Hydraulic Cylinder TP10KAC TP11KAC-D Auto Lifts SJ01-03000-000

Description

Tuxedo / Duro 2-Post Complete Hydraulic Cylinder – TP10KAC / TP11KAC-D Replacement

A worn or failing hydraulic cylinder is one of the most common reasons a 2-post car lift requires service. Replace your cylinder when you notice hydraulic fluid leaking from the barrel or shaft seals, when the lift rises slowly or unevenly, or when the arms drift down and will not hold position under load. Before ordering, confirm that your cylinder hangs from the top of the post with the chrome shaft exiting the bottom of the barrel – this is the direct-pull hanging style. Verify the overall height (approximately 72.5 inches), capacity range (10,000 – 11,000 lb), and that your model number matches one of those listed below.

Product Information

• Brand / Equipment: Tuxedo Lift, Duro Lift (also fits ProKar Lift, Auto Lift, Ideal Lift, Kernal Lift)
• Manufacturer / Reference Part Number: TP10KAC (TP11KACD-008)
• Store SKU: TUOD008
• Component: Complete Hydraulic Cylinder Assembly
• Cylinder Style: Direct-pull hanging cylinder; barrel mounts at top of post, chrome shaft exits from bottom
• Approximate Height: 72.5 inches (approximately 4 x 75 x 4 in overall package dimensions)
• Capacity Range: 10,000 and 11,000 lb Tuxedo / Duro 2-post lifts
• Listed Application: 2-Post Clear Floor Auto Lift (hanging-style cylinder configuration)

Compatible Makes / Verified Fitment Models

• Tuxedo Lift: TP10KAC-DX, TP11KAC-D, TP11KC-D, TP11KC-DX, Model 165948
• Duro Lift: Models with hanging-style cylinders, 11k capacity and under
• ProKar Lift: Compatible 10k and 11k 2-post models
• Auto Lift: Compatible 10k and 11k 2-post models
• Ideal Lift: Compatible 10k and 11k 2-post models (TP10KAC-DX)
• Kernal Lift: Compatible 10k and 11k 2-post models

Replacement / Cross-Reference Numbers

• Tuxedo / ProKar / Auto Lift OEM: 165948T*01-077, SJ01-03000-000
• Manufacturer Reference: TP11KACD-008
• Alt Store SKU: TUOD0008

Fitment and Ordering Notes

• This cylinder is designed for lifts where the cylinder hangs from the top of the post and the chrome shaft comes out of the bottom of the barrel at approximately eye level. If your cylinder sits on the base of the post, this part will not fit.
• This cylinder will not fit lifts with a chain-over-roller style ram (chain draping over a roller at the top of the shaft).
• Confirm your lift is rated at 10,000 or 11,000 lb capacity. Cylinders for 9k and lower capacity Tuxedo / Duro models are listed separately.
• When replacing a cylinder, drain and dispose of old hydraulic oil, clean the reservoir, and flush the system before installing the new unit to protect the warranty.
• Call 1-866-902-6060 with your model number and serial number if you have any questions about fitment before ordering.