Cylinder Rebuild Seal Kit Fits Challenger / VBM 2 Post Lift Chain over 31000 33000 Holmac Cylinder 11013

Description

This is 1 seal kit for VBM 2 Post Lifts made through the late 80s and through out the 90s with a 4ft tall cylinder that has a chain going over the top of it. This is for the “Holmac” version of this cylinder.

This kit came in the following Challenger / VBM Models 20000, 21000, 26000, 27000, 28000, 30000, 31000, 33000, 35000

This seal kit is the same as Challenger P# 11013 , 200340

Alt Part Number :BH-7225-59 CHR1013

-HOW TO IDENTIFY YOUR CYLINDER:

Challenger Chain Over Cylinder Seal Kit For Holmac Cylinder This Cylinder Will A Teardrop Symbol With “HC” Stamped Inside Of It And Have Numbers Stamped With The Same Format As A Social Security Number. Holmac Has A Gland That Is The Same Diameter As The Barrel And Protrudes About 1/4″ And Has 2 Spanner Wrench Holes On Top Also Has A Welded  Bung For The Breather  Sticking Off The Side Near The Top.  

2.5″ BORE x 36.5″ STROKE

-RETURN POLICY ON SEAL KITS
Our seal kits come in a sealed clear bag. Warning! Do not open bag until your verify you have the right seal kit once your cylinder is torn down. Simply remove your old seals from your cylinder and match them up by holding them next to new seals in bag.  If they appear similar inside and outside diameter then you have the correct seals. If your not sure please call us before opening the bag. We will not except returns from open /used seals because you didn’t verify fitment first.

Call our customer service hotline @ 866-902-6060 if you need help identifying which seal kit is best for you!