Bendpak MX10 MX10AC Power Unit - Motor & Hydraulic Pump for Car Lift

Description

Replacement Power unit for Bendpak MX10, MX10C, MX10AC, MX10CX, MX10ACX

Complete replacement hydraulic Power unit for all MX10 models . Includes hydraulic tank, pump, motor & switch. Replaces MTE units and emerson / fenner units.

Made by SPX Stone (Fenner) brand which are built in the USA, and have been the brand of choice for all major lift manufacturers for the past 30 years. 

• ETL Certified.
• 2.1 Gallons per Minute flow rate.
• 208-230 volt single phase. 60 hz.
• 2 hp 3450 rpm motor (3.5 hp motor torque equivalent).
• 4 gallon tank.
• Compatible with standard hydraulic oil or Dexron II transmission fluid .
• Pump outlet can be on either side of unit to allow pressure line to be mounted in the same manor your current power unit uses..
• Universal mounting bracket.
• 1 year warranty.
• Made in the USA.

Can replace many of the following brands of power units: Fenner, SPX, Stone, MTE, WEG, Monarch

OEM / Aftermarket Interchanges:

• BH-7520-08, BH-7006A-19, BH-7006A-18, BH-7006A-17, BH-7006A-16, BH-7006A-15, BH-7006A-14, BH-7006A-13, BH-7006-01LS-19, BH-7006-01LS-18, BH-7006-01LS-17, BH-7006-01LS-16, BH-7006-01LS-15, BH-7006-01LS-14, BH-7006-01LS-13, BH-7006-19, BH-7006-18, BH-7006-17, BH-7006-16, BH-7006-15, BH-7006-14, BH-7006-13 .
• AB-1468, AB1270, 17300001 AB1524, SPX AB1524
• Replaces Bendpak 5585285 ,5585078

WARNING: Replacing the hydraulic power unit DOES NOT INCREASE THE RATED CAPACITY OF THE LIFT! Never lift more than the rated capacity of any lift as structural failure WILL occur!