Product Description

Challenger Lift Seal Kit for older Challenger 2 post chain over style hydraulic cylinder seal kit.

Found In Challenger Car Lift Model 20000, 21000, 26000, 27000, 28000, 30000, 31000, 33000, 35000

Note : These lifts can come 5 different cylinder brands. Please make sure this is the kit you need before ordering.

Other possible part numbers associated with this kit are: BH-7226-10, bh 7226 10, bh722610, 11037, ch-11037

Bruning cylinders can be identified by….

On the top of the gland are 2 spiral lock rings along with a spacer.

They are removed in this order:

1: Top Spiral Ring

2: Thick Spacer Ring (It is usually split on 1 side)

3: Internal Spiral Ring

– Small breather few inches down from top gland

– 9/16″ SAE thread on bottom of cylinder (for hydraulic fitting)

– 2.5″ ID cylinder bore

– 36.5″ cylinder stroke

Bruning Cylinder Seal Kit 2.5″ Bore 11037 Challenger Car Lift Parts

Brand: Challenger Lift Parts

Challenger 11037

This seal kit will rebuild ONE Cylinder if you are needing to rebuild both cylinders you will need TWO seal kits.

If you are unsure about what seal kit you need Call us at 866-902-6060 before ordering.