Need Help? 
Description
Challenger 11191 Cylinder Seal Kit for Pacoma 15k-18k 2-Post Lifts
This is one hydraulic cylinder seal/rebuild kit for the Pacoma cylinders used in Challenger 2-post lifts rated at 15,000 and select 18,000-pound capacities. This kit rebuilds ONE cylinder – order two kits to rebuild both columns. Before ordering, verify your cylinder is a Pacoma unit: the cylinder is approximately 72″ tall with a small bleeder screw at the top. Check the cylinder body approximately 6 inches below the bleeder screw for ID stampings. If the stamping reads “Pacoma” or “Made in Germany,” and shows the numbers “11191” or “15075,” this seal kit is correct. The distinctive blue double-lipped piston seal is another identifier. If your cylinder is stamped “FAST,” a different seal kit is required.
Product Information
- Brand / Equipment: Challenger
- Manufacturer / Reference Part Number: 11191
- Store SKU: CHR1191
- Component: Hydraulic Cylinder Seal / Rebuild Kit
- Cylinder Type: Pacoma (Made in Germany), blue double-lipped piston seal
- Cylinder Height: Approximately 72″ tall with small bleeder screw at top
- Cylinder Stampings: “11191” or “15075” near the top
- Lift Capacity: 15,000 – 18,000 lbs
- Listed Application: Challenger 15000 and 18000 series 2-post lifts
Compatible Makes / Verified Fitment Models
- Challenger 15000 (all)
- Challenger 18000 (select models – verify cylinder stamping)
Fitment & Ordering Notes
Verify the cylinder reads “Pacoma” or “Made in Germany” and is stamped “11191” or “15075” before ordering. The blue double-lipped piston seal is a key identifier. Cylinders stamped “FAST” are not compatible and require a different seal kit. This kit rebuilds ONE cylinder – order two for both columns. Call 1-866-902-6060 for help confirming your cylinder type.
