Challenger Lift JSJ5-07-00CH Cylinder for X10 2 Post Lift

Description

Challenger Lift JSJ5-07-00CH Hydraulic Cylinder – X10 Two Post Lift

The hydraulic cylinder provides the lifting force for each column of the X10 two post lift. Signs that warrant cylinder replacement include visible hydraulic fluid leaks around the piston seal, slow or uneven lift rise, or loss of holding pressure. Replace cylinders in pairs – both must be serviced together to maintain synchronized lift operation.

Product Information

• Brand / Equipment: Challenger Lifts
• Manufacturer / Reference Part Number: JSJ5-07-00CH
• Component: Hydraulic Cylinder
• Quantity per Lift: 2 (replace as a matched pair)
• Listed Application: Challenger / Quality X10 10,000 lb two post surface mounted lift; E10 platform variants

Replacement / Cross-Reference Numbers

• JSJ5-07-00CH has been superseded by JSJ5-07-00CHA. The replacement cylinder (JSJ5-07-00CHA) is 3 inches shorter than the original.
• When replacing the original JSJ5-07-00CH, both cylinders must be replaced and new fittings must be obtained (reference fitting part listed in your lift service documentation).

Fitment & Ordering Notes

Verify your lift model and serial number using the data plate before ordering. JSJ5-07-00CH has been superseded – contact your supplier to confirm current availability and the correct replacement. If the original cylinders are being replaced, both must be replaced as a matched set and new hydraulic fittings must be installed. Do not mix old and new cylinder types on the same lift.