Direct Lift 30500-6100-5 Lifting Pad Base A / Lift Pad Channel for Pro 10 / PRO-V10 / PV10

Description

Direct Lift 30500-6100-5 Lifting Pad Base A / Lift Pad Channel for Pro 10 / PRO-V10 / PV10

Replace a worn, damaged, or missing lift contact component with the 30500-6100-5 Lifting Pad Base A / Lift Pad Channel, listed for use on Pro 10 / PRO-V10 / PV10. Match the part number, style, and listed Direct Lift application to your existing lift hardware before ordering.

Product Information

• Brand / Equipment: Direct Lift
• Manufacturer / Reference Part Number: 30500-6100-5
• Store SKU: DIT1005
• Component: Lifting Pad Base A / Lift Pad Channel
• Listed Application: Pro 10 / PRO-V10 / PV10

Fitment & Ordering Notes

Automotive lift manufacturers may use different parts across model years, production runs, or equipment revisions. Before ordering, compare the reference part number and the model/application information in this listing with the identification tag, parts manual, or original component on your lift. If your equipment uses a different part number, verify interchange before installation.

Additional Existing Product / Fitment Information

This is part number 38 in the drawing image above.

Fits the following lift models — part number 30500-6100-5 appears in the parts breakdown of each of these lifts: Direct Lift 10K Two-Column, PRO-10 / PROV10 / PV10 (new style), PROV10 (early).

Also listed as LIFT PAD CHANNEL. Fits Direct Lift 2-Column 10K lifts including PRO10, PRO-V10 and PV10, both new style and early serial-number units. Shown in the Master Illustrated Parts Listings, Figure #9.

The pad base channel mounts at the end of the lift arm and carries the lifting pad and flip-up risers. It is the structural base that transfers the vehicle load from the pad into the arm, and it houses the pad pin and flip-up pivot hardware.

OEM-style replacement for the factory lifting pad base on the listed models. Replace if the channel is bent, cracked or worn to the point the pad no longer sits square.