Direct Lift B52-3×40 Cotter Pin 3mm x 40mm for Pro 14F 14,000 lb Lift

Description

Direct Lift B52-3×40 Cotter Pin 3mm x 40mm for Pro 14F 14,000 lb Lift

Replace missing, worn, or damaged lift hardware with the B52-3×40 Cotter Pin 3mm x 40mm, listed for use on Pro 14F 14,000 lb Lift. This hardware is used when servicing the specified Direct Lift assembly. Match the part number, size or description, and listed application before ordering.

Product Information

• Brand / Equipment: Direct Lift
• Manufacturer / Reference Part Number: B52-3×40
• Store SKU: DIT2340
• Component: Cotter Pin 3mm x 40mm
• Listed Application: Pro 14F 14,000 lb Lift

Fitment & Ordering Notes

Automotive lift manufacturers may use different parts across model years, production runs, or equipment revisions. Before ordering, compare the reference part number and the model/application information in this listing with the identification tag, parts manual, or original component on your lift. If your equipment uses a different part number, verify interchange before installation.

Additional Existing Product / Fitment Information

This is part number 25 in the drawing image above.

Fits the Pro 14F 14,000 lb lift, shown in FIG. 9, FIG. 13, and FIG. 16 of the parts breakdown.

This 3mm x 40mm cotter pin locks clevis pins and hardware across multiple assemblies on the Pro 14F, preventing retained pins from backing out during lift cycles.

Direct replacement for the pin called out in these figures. Cotter pins are single-use hardware and should be replaced whenever removed. Verify your figure and item number before ordering.

Cross-check part number: Direct Lift B52-3×40. This is a Direct Lift replacement part.