Direct Lift DP8-2003 Rub Block / Slider for 7K / 8K / PP8+ Four-Post Lifts

Description

Direct Lift DP8-2003 Rub Block / Slider for 7K / 8K / PP8+ Four-Post Lifts

The DP8-2003 Rub Block / Slider is listed for use on 7K / 8K / PP8+ Four-Post Lifts and is intended for service or repair of compatible Direct Lift equipment. Match the reference part number, component description, and listed application to your original lift part before ordering.

Product Information

• Brand / Equipment: Direct Lift
• Manufacturer / Reference Part Number: DP8-2003
• Store SKU: DIT82003
• Component: Rub Block / Slider
• Listed Application: 7K / 8K / PP8+ Four-Post Lifts

Fitment & Ordering Notes

Automotive lift manufacturers may use different parts across model years, production runs, or equipment revisions. Before ordering, compare the reference part number and the model/application information in this listing with the identification tag, parts manual, or original component on your lift. If your equipment uses a different part number, verify interchange before installation.

Additional Existing Product / Fitment Information

This is part number 56 in the drawing image above.

Fits the following lift models — part number DP8-2003 appears in the parts breakdown of each of these lifts: Direct Lift 7K Four-Post Parking, 8K Four-Post Parking, PP8+ 8K Four-Post, PP8+ Long 8K Four-Post, PP8S 8K Four-Post.

The rub blocks are the wear pads between the crossbeam and the column, letting the crossbeam slide smoothly up and down the post without metal-on-metal contact. Worn rub blocks cause the lift to bind, rattle, or travel unevenly, and they are a normal periodic maintenance replacement on any four-post lift.

Genuine Direct Lift replacement part from the Light Duty-Direct line. Inspect and replace rub blocks in sets for even travel; confirm against Figure #2 in your parts breakdown.

Fits these lifts:

• Direct Lift — PP8+ Long (8,000 lb four-post); 7K four-post parking lift; DP8 (8,000 lb four-post parking); PP8+ (8,000 lb four-post)