Direct Lift H4P-7100 Ramp for Pro 14F 14,000 lb 4-Post Lift

Description

Direct Lift H4P-7100 Ramp for Pro 14F 14,000 lb 4-Post Lift

The H4P-7100 Ramp is listed for use on Pro 14F 14,000 lb 4-Post Lift and is intended for service or repair of compatible Direct Lift equipment. Match the reference part number, component description, and listed application to your original lift part before ordering.

Product Information

• Brand / Equipment: Direct Lift
• Manufacturer / Reference Part Number: H4P-7100
• Store SKU: DIT7100
• Component: Ramp
• Listed Application: Pro 14F 14,000 lb 4-Post Lift

Fitment & Ordering Notes

Automotive lift manufacturers may use different parts across model years, production runs, or equipment revisions. Before ordering, compare the reference part number and the model/application information in this listing with the identification tag, parts manual, or original component on your lift. If your equipment uses a different part number, verify interchange before installation.

Additional Existing Product / Fitment Information

This is part number 10.1 in the drawing image above.

Fits Direct Lift Pro 14F 14,000 lb.

The H4P-7100 ramp is shown in FIG. 12 of the Pro 14F parts breakdown. It provides the drive-on transition at the runway so vehicles can be loaded onto the lift, pivoting on its hinge hardware as the lift raises and lowers. Ramps that are bent, cracked at the hinge or badly worn create a loading hazard and should be replaced.

OEM-style replacement ramp for the Pro 14F. Verify against FIG. 12 and your lift’s serial number, as ramp styles vary between CR14/Pro 14F production runs.