Direct Lift H4P-8200 Turn Table Front Block for Pro 14F 14,000 lb 4-Post Lift

Description

Direct Lift H4P-8200 Turn Table Front Block for Pro 14F 14,000 lb 4-Post Lift

The H4P-8200 Turn Table Front Block is listed for use on Pro 14F 14,000 lb 4-Post Lift and is intended for service or repair of compatible Direct Lift equipment. Match the reference part number, component description, and listed application to your original lift part before ordering.

Product Information

• Brand / Equipment: Direct Lift
• Manufacturer / Reference Part Number: H4P-8200
• Store SKU: DIT8200
• Component: Turn Table Front Block
• Listed Application: Pro 14F 14,000 lb 4-Post Lift

Fitment & Ordering Notes

Automotive lift manufacturers may use different parts across model years, production runs, or equipment revisions. Before ordering, compare the reference part number and the model/application information in this listing with the identification tag, parts manual, or original component on your lift. If your equipment uses a different part number, verify interchange before installation.

Additional Existing Product / Fitment Information

This is part number 8.1 in the drawing image above.

Fits the following lift models — part number H4P-8200 appears in the parts breakdown of each of these lifts: Direct Lift PRO-14F (newer, 3-bolt lock), PRO-14F 14K.

Item: H4P-8200 Front Block, Turn Table | Fits Direct Lift Pro 14F 14,000 lb four-post lifts, including newer PRO14F units with the 3-bolt lock configuration. Shown in FIG. 14 (Turn Table Assembly) of the parts breakdown.

The front block sits at the front of the turn table pocket, positioning and retaining the turn plate in the runway. Replace it if the original block is damaged or missing so the turn table stays properly located during drive-on and alignment work.

OEM-style Direct Lift replacement from the HI Parts line. Confirm against FIG. 14 in your Pro 14F manual before ordering.