Forward Lift 912791 Hex Head Cap Screw 1/2"-13 x 5" Grade 8 for DP10AN, DP97S2, I10 Uprights

Description

Forward Lift 912791 Hex Head Cap Screw 1/2"-13 x 5" Grade 8 for DP10AN, DP97S2, I10 Uprights

Replace missing, worn, or damaged lift hardware with the 912791 Hex Head Cap Screw 1/2"-13 x 5" Grade 8, listed for use on DP10AN, DP97S2, I10 Uprights. This hardware is used when servicing the specified Forward Lift assembly. Match the part number, size or description, and listed application before ordering.

Product Information

• Brand / Equipment: Forward Lift
• Manufacturer / Reference Part Number: 912791
• Store SKU: FOD2791
• Component: Hex Head Cap Screw 1/2"-13 x 5" Grade 8
• Listed Application: DP10AN, DP97S2, I10 Uprights

Parts Diagram Reference

This Grade 8 plated hex head cap screw is called out in the 2′ Extended Upright Assembly (Page 22), Drawing 1 — Main Lift Assembly (DP09A-2), and Drawing 2 — Extended Upright Assembly (Page 19). It is the long, high-strength fastener used through the upright and main structure joints on these lifts.

Fitment & Ordering Notes

Automotive lift manufacturers may use different parts across model years, production runs, or equipment revisions. Before ordering, compare the reference part number and the model/application information in this listing with the identification tag, parts manual, or original component on your lift. If your equipment uses a different part number, verify interchange before installation.

Additional Existing Product / Fitment Information

In the drawing images above this is part number 50 in the DP10AN drawing and part number 49 and 13 in the DP97S2 drawing and part number 23 in the I10 drawing.

Fits the following lift models — part number 912791 appears in the parts breakdown of each of these lifts: Forward Lift DP10AN, DP97S-2, I10, I10 (111000), INT10, INT9, DP9A-S, DP97S-2 Two-Post, DP09P Two-Post Asymmetric, DP09A-2 Two-Post Asymmetric, DP97A-2 / DP10A-2 Two-Post, DPO7A Two-Post Asymmetric, DPO9S-2 Two-Post Asymmetric.

This Grade 8 plated hex head cap screw is called out in the 2′ Extended Upright Assembly (Page 22), Drawing 1 — Main Lift Assembly (DP09A-2), and Drawing 2 — Extended Upright Assembly (Page 19). It is the long, high-strength fastener used through the upright and main structure joints on these lifts.

OEM replacement from the Forward Parts family. Grade 8 hardware is specified for a reason at these locations; always replace with matching grade, thread, and length per the assembly drawings.