Forward Lift H4P-1010 Cross Beam Positioning Block for CR14 14000EWT 4-Post Lift

Description

Forward Lift H4P-1010 Cross Beam Positioning Block for CR14 14000EWT 4-Post Lift

The H4P-1010 Cross Beam Positioning Block is listed for use on CR14 14000EWT 4-Post Lift and is intended for service or repair of compatible Forward Lift equipment. Match the reference part number, component description, and listed application to your original lift part before ordering.

Product Information

• Brand / Equipment: Forward Lift
• Manufacturer / Reference Part Number: H4P-1010
• Store SKU: FODP1010
• Component: Cross Beam Positioning Block
• Listed Application: CR14 14000EWT 4-Post Lift

Fitment & Ordering Notes

Automotive lift manufacturers may use different parts across model years, production runs, or equipment revisions. Before ordering, compare the reference part number and the model/application information in this listing with the identification tag, parts manual, or original component on your lift. If your equipment uses a different part number, verify interchange before installation.

Additional Existing Product / Fitment Information

This is part number 4.8 in the drawing image above.

This positioning block fits the Direct Lift CR14 (14000EWT) 14,000 lb four-post lift, serial series 994359-9-20071, and appears in Table 6-8, the master complete parts listing.

The positioning block locates the cross beam correctly relative to the column as the beam travels up and down, keeping the beam square in the columns and the latches aligned with their lock positions. Worn blocks produce play and clunking in the beam-to-column interface and should be replaced when sloppiness develops.

Genuine Direct Lift HI Parts replacement. Check the Table 6-8 breakdown for quantity per lift, as blocks are used at multiple beam positions.

Cross-check part number: Forward Lift H4P-1010. This is a Forward Lift replacement part.