Forward Lift H4P-R2000 52" Approach Ramp Assembly for CR14 14000EWT Ramp; PRO14F 4-Post Lifts

Forward Lift H4P-R2000 52" Approach Ramp Assembly for CR14 14000EWT & PRO14F 4-Post Lifts parts diagram

Forward Lift H4P-R2000 52" Approach Ramp Assembly for CR14 14000EWT & PRO14F 4-Post Lifts parts diagram (location)

$597.89

Availability: In Stock

SKU: FOD2000

Forward Lift H4P-R2000 — 52" Approach Ramp Assembly for CR14 14000EWT & PRO14F 4-Post Lifts. Use the part number and listed lift application to confirm compatibility before ordering.

Item: H4P-R2000 52-inch approach ramp assembly for Forward CR14 (14000EWT) and PRO14F four-post lifts, superseding the earlier ramp part. Forward Lift part number H4P-R2000.

Availability may vary depending on vendor stock.

Description

Forward Lift H4P-R2000 52″ Approach Ramp Assembly for CR14 14000EWT Ramp; PRO14F 4-Post Lifts

The H4P-R2000 52″ Approach Ramp Assembly is listed for use on CR14 14000EWT Ramp; PRO14F 4-Post Lifts and is intended for service or repair of compatible Forward Lift equipment. Match the reference part number, component description, and listed application to your original lift part before ordering.

Product Information

Brand / Equipment: Forward Lift
Manufacturer / Reference Part Number: H4P-R2000
Store SKU: FOD2000
Component: 52″ Approach Ramp Assembly
Listed Application: CR14 14000EWT & PRO14F 4-Post Lifts

Fitment & Ordering Notes

Automotive lift manufacturers may use different parts across model years, production runs, or equipment revisions. Before ordering, compare the reference part number and the model/application information in this listing with the identification tag, parts manual, or original component on your lift. If your equipment uses a different part number, verify interchange before installation.

Additional Existing Product / Fitment Information

This is part number 5 in the drawing image above.

Fits the following lift models — part number H4P-R2000 appears in the parts breakdown of each of these lifts: Direct Lift CR14 (14,000 lb EWT), CR14 14000 (serial 00N), PRO-14F (newer, 3-bolt lock), PRO-14F 14K.

The Forward Lift H4P-R2000 is a 52-inch approach ramp assembly for 14,000 lb four-post lifts. It appears in the Frame Assembly with Ramp/Stopper Detail (Drawing 2, p.39), the Frame with Power Unit & Cylinder Assembly (Drawing 3, p.40), and FIG. 13 of the parts breakdowns.

It fits the CR14 (14000EWT) 994359, CR14114000 SER# 00N, and the newer PRO14F with 3-bolt lock ladder. The approach ramp hinges at the rear of the runway so vehicles can drive up onto the lift, then acts as a rear wheel stop when the runways are raised.

This is the OEM ramp assembly and is listed in the catalog as the replacement for the earlier H4P-R2000 ramp part. Confirm your lift model and serial range against the parts drawing before ordering.