Direct Lift 30400-5011 Bushing for 2-Column 8K, BP9 & HR8000 Lifts

Direct Lift HR8000 Hydraulic Cylinder item 66 DIT5011

Direct Lift HR8000 Hydraulic Cylinder item 66 DIT5011 (location)

Availability: In Stock

SKU: DIT5011

Direct Lift 30400-5011 — Bushing for 2-Column 8K, BP9 & HR8000 Lifts. Use the part number and listed lift application to confirm compatibility before ordering.

Replacement bushing (part 30400-5011) for 2-column 8K, BP9 floor plate and HR8000 lifts, used in the carriage and safety latch assembly. Direct Lift part number 30400-5011.

Availability may vary depending on vendor stock.

Description

Direct Lift 30400-5011 Bushing for 2-Column 8K, BP9 & HR8000 Lifts

The 30400-5011 Bushing is listed for use on 2-Column 8K, BP9 & HR8000 Lifts and is intended for service or repair of compatible Direct Lift equipment. Match the reference part number, component description, and listed application to your original lift part before ordering.

Product Information

Brand / Equipment: Direct Lift
Manufacturer / Reference Part Number: 30400-5011
Store SKU: DIT5011
Component: Bushing
Listed Application: 2-Column 8K, BP9 & HR8000 Lifts

Fitment & Ordering Notes

Automotive lift manufacturers may use different parts across model years, production runs, or equipment revisions. Before ordering, compare the reference part number and the model/application information in this listing with the identification tag, parts manual, or original component on your lift. If your equipment uses a different part number, verify interchange before installation.

Additional Existing Product / Fitment Information

In the drawing images above this is part number 66 in the PARTS BREAKDOWN 2-COLUMN 8K AUTOMO drawing and part number 41 in the PARTS BREAKDOWN BP9 FLOOR PLATE AU drawing and part number 66 in the PARTS BREAKDOWN HR8000 8K FLOOR PL drawing.

Fits the following lift models — part number 30400-5011 appears in the parts breakdown of each of these lifts: Direct Lift 8K Two-Column Automotive, BP9 Floor Plate, HR-8000 8K Floor Plate, OH-8000 8K Overhead, PRO-9 / PRO-9F 9K Two-Column, PRO-9F 9K Floor Plate, HR-8000, PRO-9F.

This bushing is used in the carriage, arm-lock and safety latch assembly of these two-column lifts. It appears in the carriage/safety block detail drawings (Drawing 1 and Drawing 2, pages 24-26) of the 2-Column 8K, BP9 and HR8000 parts breakdowns.

Direct replacement for the factory bushing. Worn bushings cause slop in pivoting components; replace them during carriage or safety system service. Verify the drawing callout in your parts breakdown before ordering.

Cross-check part number: Direct Lift 30400-5011. This is a Direct Lift replacement part.