Rotary Lift 40707 1/2"-13NC Hex Nylon Insert Locknut for DL9, DP10 & I10 Two-Post Lift Main Assembly

Description

Rotary Lift 40707 1/2"-13NC Hex Nylon Insert Locknut for DL9, DP10 & I10 Two-Post Lift Main Assembly

Replace missing, worn, or damaged lift hardware with the 40707 1/2"-13NC Hex Nylon Insert Locknut, listed for use on DL9, DP10 & I10 Two-Post Lift Main Assembly. This hardware is used when servicing the specified Rotary Lift assembly. Match the part number, size or description, and listed application before ordering.

Product Information

• Brand / Equipment: Rotary Lift
• Manufacturer / Reference Part Number: 40707
• Store SKU: ROY0707
• Component: 1/2"-13NC Hex Nylon Insert Locknut
• Listed Application: DL9, DP10 & I10 Two-Post Lift Main Assembly

Fitment & Ordering Notes

Automotive lift manufacturers may use different parts across model years, production runs, or equipment revisions. Before ordering, compare the reference part number and the model/application information in this listing with the identification tag, parts manual, or original component on your lift. If your equipment uses a different part number, verify interchange before installation.

Additional Existing Product / Fitment Information

In the drawing images above this is part number 56 in the DL9 parts drawing and part number 37 in the DP10-Parts new style w lock covers drawing and part number 37 in the I10N000M drawing.

Fits the following lift models — part number 40707 appears in the parts breakdown of each of these lifts: Rotary Lift DL9, DP10 (new style with lock covers), I10N000M, I12 Pro; F12 / I12.

Rotary Light Duty two-post parts line. Called out in the Main Lift Assembly sections (columns, overhead, carriage and power unit) of the DL9, DP10 (new style with lock covers) and I10N000M 2-post 12,000 lb. parts breakdowns. Rotary cross-references this nut as the same part as 912603 and 40708.

The nylon collar keeps this half-inch locknut from backing off on main assembly hardware that cycles under load every time the lift is used.

Direct OEM replacement for Rotary part numbers 40707 / 40708 / 912603 (SKU ROY40707). Confirm the position on your lift’s main assembly diagram.

Fits these lifts:

• Direct Lift — DL9 (9,000 lb two-post)
• Hanmecson (VSG) — DL9
• Forward Lift — DP10 (new style with lock covers); I10 (I10N000M); I12PRO (12,000 lb two-post); F12 / I12 (12,000 lb two-post)
• Rotary Lift — interchange P/N 40707