Direct Lift GB93-87 Lock Washer (6mm-20mm Sizes) for DP-7, Mid-Rise 6K & CR14114000 Lifts

Description

Direct Lift GB93-87 Lock Washer (6mm-20mm Sizes) for DP-7, Mid-Rise 6K & CR14114000 Lifts

Replace missing, worn, or damaged lift hardware with the GB93-87 Lock Washer (6mm-20mm Sizes), listed for use on DP-7, Mid-Rise 6K & CR14114000 Lifts. This hardware is used when servicing the specified Direct Lift assembly. Match the part number, size or description, and listed application before ordering.

Product Information

• Brand / Equipment: Direct Lift
• Manufacturer / Reference Part Number: GB93-87
• Store SKU: DITB9387AMS
• Component: Lock Washer (6mm-20mm Sizes)
• Listed Application: DP-7, Mid-Rise 6K & CR14114000 Lifts

Fitment & Ordering Notes

Automotive lift manufacturers may use different parts across model years, production runs, or equipment revisions. Before ordering, compare the reference part number and the model/application information in this listing with the identification tag, parts manual, or original component on your lift. If your equipment uses a different part number, verify interchange before installation.

Additional Existing Product / Fitment Information

In the drawing images above this is part number 18 in the CR14114000 SER# 00N drawing and part number 14, 53 and 65 in the PARTS BREAKDOWN DP-7 4-POST PARKIN drawing and part number 27 in the PARTS BREAKDOWN MID-RISE 6K 2005 drawing.

Fits the following lift models — part number GB93-87 appears in the parts breakdown of each of these lifts: Direct Lift CR14 14000 (serial 00N), DP-7 Four-Post Parking, Mid-Rise 6K (2005), PRO-9 / PRO-9F 9K Two-Column.

The GB93-87 is the standard lock washer used throughout multiple lift models, including the Direct Lift DP-7 4-post parking lift, the Mid-Rise 6K scissor lift, and the CR14114000 14,000 lb 4-post lift. The parts manuals list it in a range of sizes (6, 8, 10, 12, 16, 18, and 20mm) depending on the assembly, from column assemblies and runway/cross beam frames to caster frame hardware.

Spring lock washers keep bolted joints tight under the vibration and load cycling a lift experiences in service. Replacing flattened or corroded lock washers when servicing fasteners is inexpensive insurance.

Direct replacement per the applicable parts breakdown. Match the washer size to the specific figure callout for your lift model before ordering.