Direct Lift DP8-3013 Main Cylinder Cable for ProPark 8 Plus 4-Post Car Storage Lift

Description

Direct Lift DP8-3013 Main Cylinder Cable for ProPark 8 Plus 4-Post Car Storage Lift

Replace a lifting cable when you notice fraying, kinking, or uneven platform height. This is the main cylinder cable (cable block cable) for the Direct Lift ProPark 8 Plus – it pulls the cable block to which the four column cables are attached, and is located under the runway near the hydraulic cylinder. This cable fits late-model lifts with adjustable lock ladders – verify that the inside back of each post has a plate with square holes that can be adjusted up and down. Also verify that your post height is 95-3/4 in. (without approach ramps).

Product Information

• Brand / Equipment: Direct Lift (4-Post)
• Manufacturer / Reference Part Number: DP8-3013
• Store SKU: DIT3013
• Component: Main cylinder cable (cable block drive cable)
• Post Height: 95-3/4 in. (late model)
• Listed Application: Direct Lift ProPark 8 Plus, PP8+ Long, DP8 (8,000 lb 4-post)

Compatible Makes / Verified Fitment Models

• Direct Lift PP8+ (8,000 lb four-post)
• Direct Lift PP8+ Long (8,000 lb four-post)
• Direct Lift DP8 (8,000 lb four-post parking)

Parts Diagram & Manual Reference

This cable corresponds to item 52 in the parts diagram (see product photos). Referenced in: 8K 4-POST PARKING – Cylinder and Cable Components – Figure 6; PP8+ 8K 4-POST – Cylinder and Cable Components – Figure 6.

Fitment & Ordering Notes

This cable fits late-model lifts with adjustable lock ladders only – there is an early and a late version of this lift. Verify adjustable locks, post height, and overall lift length before ordering. If unsure which cable you need, call 866-902-6060 for assistance.