John Bean 6-1936 Lift Power Unit / Motor & Hydraulic Pump for Car Lift Power Pack Wheeltronics

Description

Replacement Power unit for John Bean Lift Motor 4 post 12k lift

Replaces Part John Bean  6-1936  Model ab-1400 on many 4 post hoists

Also used on Snapon 4 Post 12,000 lb lift &  and Wheeltronics 4 Post lifts

This is a USA made Fenner Stone Spx Hydraulic Pump that replaces The Part Numbers above and should be a direct replacement for the motor on the lift.

Fits –

Wheeltronics M#EELR101A , quadrack 12000 series and many other 4 post lifts

John Bean 43102Q, 43102QE and other 4 post models

Made by SPX Stone (Fenner) brand which are built in the USA, and have been the brand of choice for all John Bean, Wheeltronics and Snap on  for the past 30 years. 

• ETL Certified.
• 2.1 Gallons per Minute flow rate.
• 208-230 volt single phase. 60 hz.
• 2 hp 3450 rpm motor (3.5 hp motor torque equivalent).
• 4 gallon tank.
• Compatible with standard hydraulic oil or Dexron II transmission fluid .
• Pump outlet can be on either side of unit to allow pressure line to be mounted in the same manor your current power unit uses..
• Universal mounting bracket.
• 1 year warranty.
• Made in the USA.

WARNING: Replacing the hydraulic power unit DOES NOT INCREASE THE RATED CAPACITY OF THE LIFT! Never lift more than the rated capacity of any lift as structural failure WILL occur!.