Forward Lift FJ7380 3/4" x 5-1/2" Concrete Anchor Bolt for DL9, DP10, I10 Two-Post Lifts

Description

Forward Lift FJ7380 3/4" x 5-1/2" Concrete Anchor Bolt for DL9, DP10, I10 Two-Post Lifts

Replace missing, worn, or damaged lift hardware with the FJ7380 3/4" x 5-1/2" Concrete Anchor Bolt, listed for use on DL9, DP10, I10 Two-Post Lifts. This hardware is used when servicing the specified Forward Lift assembly. Match the part number, size or description, and listed application before ordering.

Product Information

• Brand / Equipment: Forward Lift
• Manufacturer / Reference Part Number: FJ7380
• Store SKU: FOD7380
• Component: 3/4" x 5-1/2" Concrete Anchor Bolt
• Listed Application: DL9, DP10, I10 Two-Post Lifts

Fitment & Ordering Notes

Automotive lift manufacturers may use different parts across model years, production runs, or equipment revisions. Before ordering, compare the reference part number and the model/application information in this listing with the identification tag, parts manual, or original component on your lift. If your equipment uses a different part number, verify interchange before installation.

Additional Existing Product / Fitment Information

In the drawing images above this is part number 11 in the DL9 parts drawing and part number 23 in the DP10-Parts new style w lock covers drawing and part number 23 in the I10N000M drawing.

Fits the following lift models — part number FJ7380 appears in the parts breakdown of each of these lifts: Rotary Lift DL9, DP10 (new style with lock covers), I10N000M, I12 Pro, 12K Four-Post Open-Front, OR14 14K Four-Post, TL07; F12 / I12.

The FJ7380 is a 3/4″ x 5-1/2″ concrete anchor bolt used to secure the columns of two-post automotive lifts to the shop floor. It is called out in the main lift assembly breakdowns for the DL9, DP10 (new style with lock covers), and I10 (I10N000M) 10,000 and 12,000 lb. class two-post lifts, where 10 anchors are typically required per lift.

Column anchors are the primary connection between your lift and the concrete slab. Damaged, stripped, or corroded anchor bolts should never be reused; replacing them with the correct diameter and length is critical to safe lift installation and annual inspection compliance.

This anchor is included in kit GP1016 and replaces the older 913828KIT. Confirm your slab thickness and lift installation manual requirements before installing.

Cross-check part number: Forward Lift FJ7380. This is a Forward Lift replacement part.

Fits these lifts:

• Direct Lift — DL9 (9,000 lb two-post)
• Hanmecson (VSG) — DL9
• Forward Lift — DP10 (new style with lock covers); I10 (I10N000M); I12PRO (12,000 lb two-post); F12 / I12 (12,000 lb two-post); TLO7 (300 series two-post)