Forward Lift 40252 5/16"-18NC x 3/4" HHCS Zinc Plated Bolt for 12K & OR14 4-Post Yoke Ends

Description

Forward Lift 40252 5/16"-18NC x 3/4" HHCS Zinc Plated Bolt for 12K & OR14 4-Post Yoke Ends

Replace missing, worn, or damaged lift hardware with the 40252 5/16"-18NC x 3/4" HHCS Zinc Plated Bolt, listed for use on 12K & OR14 4-Post Yoke Ends. This hardware is used when servicing the specified Forward Lift assembly. Match the part number, size or description, and listed application before ordering.

Product Information

• Brand / Equipment: Forward Lift
• Manufacturer / Reference Part Number: 40252
• Store SKU: FOD0252
• Component: 5/16"-18NC x 3/4" HHCS Zinc Plated Bolt
• Listed Application: 12K & OR14 4-Post Yoke Ends

Fitment & Ordering Notes

Automotive lift manufacturers may use different parts across model years, production runs, or equipment revisions. Before ordering, compare the reference part number and the model/application information in this listing with the identification tag, parts manual, or original component on your lift. If your equipment uses a different part number, verify interchange before installation.

Additional Existing Product / Fitment Information

This is part number 1 in the drawing image above.

Fits the following lift models — part number 40252 appears in the parts breakdown of each of these lifts: Rotary Lift 12K Four-Post Open-Front, OR14 14K Four-Post.

The Rotary Lift 40252 is a 5/16″-18NC x 3/4″ long hex head cap screw (HHCS), zinc plated, from Rotary’s light-duty parts family.

It is called out in the Front Yoke End Detail and Rear Yoke End Detail sections of the 12K four-post open-front and OR14 14K four-post parts breakdowns, securing yoke end hardware on these lifts.

OEM-spec replacement fastener. Match to the yoke end detail item number in your model’s parts breakdown before ordering.

Cross-check part number: Forward Lift 40252. This is a Forward Lift replacement part.