Need Help? 
Description
Ben Pearson 91130 4 Post Lift Chain Roller Bearing Kit – BAY MASTER 12000
This kit provides one replacement cross-rail chain roller bearing for Ben Pearson 4-post lifts. The roller sits in the crossbeam of the lift (the metal beam at the front and rear that the runways rest on and chains run through) and can also be used on the overhead beam on some models. Failed rollers typically cause the lift to hop or vibrate during raising and lowering, and worn bronze bushings can lead to pin damage or chain failure. Inspect all rollers when one is found to be bad. This roller is an upgrade with sealed roller bearings over the original bronze bushing style. Kit includes one heavy-duty cross-rail roller and one replacement bolt and lock nut. Note: Ben Pearson lifts were offered with two pin sizes – measure the pin diameter on your lift before ordering.
Product Information
- Brand / Equipment: Ben Pearson Lift (4-post)
- Manufacturer / Reference Part Number: 91130
- Store SKU: roll2.75-.75
- Component: Cross-Rail Chain Roller Bearing Kit (1 roller + hardware)
- Outside Diameter: 2.75 in. (including edges)
- Inside Diameter / Pin Hole: 3/4 in. (0.75 in.)
- Bearing Type: Sealed roller bearing (replaces bronze bushing style)
- Kit Contents: 1 HD cross-rail roller, 1 replacement bolt, 1 lock nut
- Listed Capacity: 12,000 – 25,000 lb Ben Pearson lifts
- Listed Application: Ben Pearson BAY MASTER 12000-4, 12000-4AL, 12000-4AS, some LMT12 models, LMT22, LMT6, FAR12, LMA12, and others
Compatible Makes / Verified Fitment Models
Listed for the following Ben Pearson lift models:
- Ben Pearson BAY MASTER 4 POST 12000-4
- Ben Pearson BAY MASTER 4 POST 12000-4AL
- Ben Pearson BAY MASTER 4 POST 12000-4AS
- Ben Pearson LMT12 (some models)
- Ben Pearson LMT22
- Ben Pearson LMT6
- Ben Pearson FAR12
- Ben Pearson LMA12
Replacement / Cross-Reference Numbers
- Ben Pearson 91130
- Ben Pearson 80028
Fitment & Ordering Notes
Measure your existing roller outside diameter and pin hole diameter before ordering. Ben Pearson offered two pin sizes across models – verify your pin diameter matches 3/4 in. before purchasing. On 12,000 and 15,000 lb lifts there are typically 4 rollers per cross rail corner and up to 2 more on the overhead beam; 18,000 to 25,000 lb capacity lifts may have up to 10 rollers total. Call 866-902-6060 to confirm fitment.
