Direct Lift B41-20 20mm Flat Washer for CR14, I12 & 2-Post 10K Cable Routing

Description

Direct Lift B41-20 20mm Flat Washer for CR14, I12 & 2-Post 10K Cable Routing

Replace missing, worn, or damaged lift hardware with the B41-20 20mm Flat Washer, listed for use on CR14, I12 & 2-Post 10K Cable Routing. This hardware is used when servicing the specified Direct Lift assembly. Match the part number, size or description, and listed application before ordering.

Product Information

• Brand / Equipment: Direct Lift
• Manufacturer / Reference Part Number: B41-20
• Store SKU: DIT4120
• Component: 20mm Flat Washer
• Listed Application: CR14, I12 & 2-Post 10K Cable Routing

Fitment & Ordering Notes

Automotive lift manufacturers may use different parts across model years, production runs, or equipment revisions. Before ordering, compare the reference part number and the model/application information in this listing with the identification tag, parts manual, or original component on your lift. If your equipment uses a different part number, verify interchange before installation.

Additional Existing Product / Fitment Information

In the drawing images above this is part number 25 and 10 in the CRA14_PARTS-BREAKDOWN drawing and part number 47 in the I12-Parts drawing and part number 75 in the PARTS BREAKDOWN 2-COLUMN 10K drawing.

Fits the following lift models — part number B41-20 appears in the parts breakdown of each of these lifts: Forward Lift CRA14, CR14 (newer); Direct Lift I12, 10K Two-Column, 8K Two-Column Automotive, 7K Four-Post Parking, 9K Parking (wide version), BP9 Floor Plate, HR-8000 8K Floor Plate, OH-8000 8K Overhead, PP8+ 8K Four-Post, PP8+ Long 8K Four-Post, PP8S 8K Four-Post, PP9+ 9K Four-Post, PRO-9D 9K Two-Column, PRO-9F 9K Floor Plate, PRO-10 / PROV10 / PV10 (new style), PROV12 / PRO-12, PV12, HR-8000, PRO-9F, PROV10 (early); PRO-9D.

This 20mm flat washer appears in the cable components and routing diagrams (Figures #3 and #8) of the applicable parts breakdowns. It backs the large fasteners on cable anchor and sheave hardware, distributing load where the lifting cables terminate and route through the lift.

Direct OEM-style replacement for the factory B41-20 washer. Confirm your model and figure number before ordering.

Fits these lifts:

• Direct Lift — PP8+ Long (8,000 lb four-post); 7K four-post parking lift; HR8000 (8,000 lb floor-plate two-post); I12 (12,000 lb two-post); PP8+ (8,000 lb four-post)
• Forward Lift — CRA14